Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 5.4
edited by Admin
on 2024/12/26 17:26
Change comment: There is no comment for this version
To version 1.1
edited by Admin
on 2024/12/11 13:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -Battery management systems.BMS Mini S.WebHome
1 +drafts.BMS Mini S.WebHome
Content
... ... @@ -3,33 +3,34 @@
3 3  
4 4  == Introduction ==
5 5  
6 -This document describes the steps for updating the BMS Mini S and BMS Mini firmware.
6 +This document describes the steps for updating the BMS Mini 2 and BMS Mini S firmware.
7 7  
8 -Updating the BMS Mini device firmware can be done in the following ways:
8 +Updating the BMS Mini firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB only);
11 -* via device configuration interface (available via USB, CAN and TCP).
10 +* via USB;
11 +* via CAN bus;
12 +* via RS-485 bus;
13 +* using the device configuration interface (available via USB, CAN, and Wi-Fi).
12 12  
13 13  The following hardware and software are required:
14 14  
15 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 -* USB/CAN adapter for updating via CAN bus;
17 -* USB-mini cable for updating via USB;
18 -* BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via TCP;
19 -* Firmware file (must be in "Motorola S-record .srec" format).
17 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini 2 / Mini S.
18 +* USB/CAN adapter for updating via CAN bus.
19 +* USB/RS-485 adapter for updating via RS-485 bus.
20 +* Firmware file (must be in Motorola S-record format).
20 20  
21 -== Updating via bootloader ==
22 -
23 23  Firmware updating includes two steps:
24 24  
25 25  * starting the bootloader;
26 26  * uploading the firmware file to the BMS Mini flash memory.
27 27  
27 +== Updating via USB, CAN, RS-485 ==
28 +
28 28  **~1. Start the device bootloader.**
29 29  
30 -* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB, CAN or TCP connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
31 +* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
31 31  
32 -[[image:1733921952732-294.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="166" width="600"]]
33 +[[image:1733921952732-294.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
33 33  
34 34  * **Method 2**: hold the SW1 button on the device for 1 second. After the indication LEDs go out, release the button. A restart will be performed, and the device will enter bootloader mode.
35 35  
... ... @@ -46,7 +46,7 @@
46 46  
47 47  [[image:https://docs.movicomelectric.com/bin/download/Battery%20management%20systems/BMS%20Main%203/5.%20Firmware%20update/WebHome/1733406691402-715.png?rev=1.1||alt="1733406691402-715.png" data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="258" width="341"]]
48 48  
49 -[[image:1733922048348-345.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="357" width="334"]]
50 +[[image:1733922048348-345.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="300" width="281"]]
50 50  
51 51  2.2 From the drop-down menu of the Updater window, select the method of connecting to the BMS Mini device and configure the connection parameters (the "Settings..." button).
52 52  
... ... @@ -77,7 +77,7 @@
77 77  
78 78  2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button,
79 79  
80 -[[image:1733922048352-144.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="164" width="600"]]
81 +[[image:1733922048352-144.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="175" width="639"]]
81 81  
82 82  3. Select the "Motorola S-Record files (*.srec)" on the bottom right corner and specify the path to the file with the new main firmware: (*.srec).
83 83