Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 5.3
edited by Admin
on 2024/12/26 17:24
Change comment: There is no comment for this version
To version 5.2
edited by Admin
on 2024/12/26 17:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,15 +7,17 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB only);
11 -* via device configuration interface (available via USB, CAN and TCP).
10 +* via USB;
11 +* via CAN bus;
12 +* via ;
13 +* using the device configuration interface (available via USB, CAN, and Wi-Fi).
12 12  
13 13  The following hardware and software are required:
14 14  
15 15  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 16  * USB/CAN adapter for updating via CAN bus;
17 -* USB-mini cable for updating via USB;
18 -* BMS Wi-Fi or BMS LANmodule installed on BMS Main 3 if updating via TCP
19 +* USB-mini cable for updating via Serial port;
20 +*
19 19  * Firmware file (must be in Motorola S-record format).
20 20  
21 21  == Updating via bootloader ==