Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 5.2
edited by Admin
on 2024/12/26 17:23
Change comment: There is no comment for this version
To version 5.4
edited by Admin
on 2024/12/26 17:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,18 +7,16 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via ;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via bootloader (available via USB only);
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
18 18  * USB/CAN adapter for updating via CAN bus;
19 -* USB-mini cable for updating via Serial port;
20 -*
21 -* Firmware file (must be in Motorola S-record format).
17 +* USB-mini cable for updating via USB;
18 +* BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via TCP;
19 +* Firmware file (must be in "Motorola S-record .srec" format).
22 22  
23 23  == Updating via bootloader ==
24 24  
... ... @@ -29,7 +29,7 @@
29 29  
30 30  **~1. Start the device bootloader.**
31 31  
32 -* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
30 +* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB, CAN or TCP connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
33 33  
34 34  [[image:1733921952732-294.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="166" width="600"]]
35 35