Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 5.2
edited by Admin
on 2024/12/26 17:23
Change comment: There is no comment for this version
To version 5.3
edited by Admin
on 2024/12/26 17:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,17 +7,15 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via ;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via bootloader (available via USB only);
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
18 18  * USB/CAN adapter for updating via CAN bus;
19 -* USB-mini cable for updating via Serial port;
20 -*
17 +* USB-mini cable for updating via USB;
18 +* BMS Wi-Fi or BMS LANmodule installed on BMS Main 3 if updating via TCP
21 21  * Firmware file (must be in Motorola S-record format).
22 22  
23 23  == Updating via bootloader ==