Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 5.2
edited by Admin
on 2024/12/26 17:23
Change comment: There is no comment for this version
To version 5.1
edited by Admin
on 2024/12/23 16:04
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,24 +9,23 @@
9 9  
10 10  * via USB;
11 11  * via CAN bus;
12 -* via ;
12 +* via RS-485 bus;
13 13  * using the device configuration interface (available via USB, CAN, and Wi-Fi).
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
18 -* USB/CAN adapter for updating via CAN bus;
19 -* USB-mini cable for updating via Serial port;
20 -*
17 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini.
18 +* USB/CAN adapter for updating via CAN bus.
19 +* USB/RS-485 adapter for updating via RS-485 bus.
21 21  * Firmware file (must be in Motorola S-record format).
22 22  
23 -== Updating via bootloader ==
24 -
25 25  Firmware updating includes two steps:
26 26  
27 27  * starting the bootloader;
28 28  * uploading the firmware file to the BMS Mini flash memory.
29 29  
27 +== Updating via USB, CAN, RS-485 ==
28 +
30 30  **~1. Start the device bootloader.**
31 31  
32 32  * **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item: