Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 4.1
edited by Admin
on 2024/12/23 16:04
Change comment: There is no comment for this version
To version 5.3
edited by Admin
on 2024/12/26 17:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,25 +7,24 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via RS-485 bus;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via bootloader (available via USB only);
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini 2.
18 -* USB/CAN adapter for updating via CAN bus.
19 -* USB/RS-485 adapter for updating via RS-485 bus.
15 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 +* USB/CAN adapter for updating via CAN bus;
17 +* USB-mini cable for updating via USB;
18 +* BMS Wi-Fi or BMS LANmodule installed on BMS Main 3 if updating via TCP
20 20  * Firmware file (must be in Motorola S-record format).
21 21  
21 +== Updating via bootloader ==
22 +
22 22  Firmware updating includes two steps:
23 23  
24 24  * starting the bootloader;
25 25  * uploading the firmware file to the BMS Mini flash memory.
26 26  
27 -== Updating via USB, CAN, RS-485 ==
28 -
29 29  **~1. Start the device bootloader.**
30 30  
31 31  * **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item: