Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 3.1
edited by Admin
on 2024/12/12 16:46
Change comment: There is no comment for this version
To version 2.2
edited by Admin
on 2024/12/11 13:11
Change comment: Update document after refactoring.

Summary

Details

Page properties
Content
... ... @@ -3,9 +3,9 @@
3 3  
4 4  == Introduction ==
5 5  
6 -This document describes the steps for updating the BMS Mini S and BMS Mini 2 firmware.
6 +This document describes the steps for updating the BMS Mini 2 and BMS Mini S firmware.
7 7  
8 -Updating the BMS Mini device firmware can be done in the following ways:
8 +Updating the BMS Mini firmware can be done in the following ways:
9 9  
10 10  * via USB;
11 11  * via CAN bus;
... ... @@ -14,7 +14,7 @@
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini 2.
17 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini 2 / Mini S.
18 18  * USB/CAN adapter for updating via CAN bus.
19 19  * USB/RS-485 adapter for updating via RS-485 bus.
20 20  * Firmware file (must be in Motorola S-record format).