Changes for page 5. Firmware update

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -3,29 +3,28 @@
3	3
4	4	== Introduction ==
5	5
6		-This document describes the steps for updating the BMS Mini 2 and BMS Mini S firmware.
	6	+This document describes the steps for updating the BMS Mini S and BMS Mini firmware.
7	7
8		-Updating the BMS Mini firmware can be done in the following ways:
	8	+Updating the BMS Mini device firmware can be done in the following ways:
9	9
10		-* via USB;
11		-* via CAN bus;
12		-* via RS-485 bus;
13		-* using the device configuration interface (available via USB, CAN, and Wi-Fi).
	10	+* via bootloader (available via USB only);
	11	+* via device configuration interface (available via USB, CAN and TCP).
14	14
15	15	The following hardware and software are required:
16	16
17		-* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini 2 / Mini S.
18		-* USB/CAN adapter for updating via CAN bus.
19		-* USB/RS-485 adapter for updating via RS-485 bus.
	15	+* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
	16	+* USB/CAN adapter for updating via CAN bus;
	17	+* USB-mini cable for updating via USB;
	18	+* BMS Wi-Fi or BMS LANmodule installed on BMS Main 3 if updating via TCP
20	20	* Firmware file (must be in Motorola S-record format).
21	21
	21	+== Updating via bootloader ==
	22	+
22	22	Firmware updating includes two steps:
23	23
24	24	* starting the bootloader;
25	25	* uploading the firmware file to the BMS Mini flash memory.
26	26
27		-== Updating via USB, CAN, RS-485 ==
28		-
29	29	**~1. Start the device bootloader.**
30	30
31	31	* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item: