Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 2.1
edited by Admin
on 2024/12/11 13:10
Change comment: There is no comment for this version
To version 5.2
edited by Admin
on 2024/12/26 17:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Mini S.WebHome
1 +Battery management systems.BMS Mini S.WebHome
Content
... ... @@ -3,29 +3,30 @@
3 3  
4 4  == Introduction ==
5 5  
6 -This document describes the steps for updating the BMS Mini 2 and BMS Mini S firmware.
6 +This document describes the steps for updating the BMS Mini S and BMS Mini firmware.
7 7  
8 -Updating the BMS Mini firmware can be done in the following ways:
8 +Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 10  * via USB;
11 11  * via CAN bus;
12 -* via RS-485 bus;
12 +* via ;
13 13  * using the device configuration interface (available via USB, CAN, and Wi-Fi).
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini 2 / Mini S.
18 -* USB/CAN adapter for updating via CAN bus.
19 -* USB/RS-485 adapter for updating via RS-485 bus.
17 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
18 +* USB/CAN adapter for updating via CAN bus;
19 +* USB-mini cable for updating via Serial port;
20 +*
20 20  * Firmware file (must be in Motorola S-record format).
21 21  
23 +== Updating via bootloader ==
24 +
22 22  Firmware updating includes two steps:
23 23  
24 24  * starting the bootloader;
25 25  * uploading the firmware file to the BMS Mini flash memory.
26 26  
27 -== Updating via USB, CAN, RS-485 ==
28 -
29 29  **~1. Start the device bootloader.**
30 30  
31 31  * **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item: