Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 12.3
edited by Admin
on 2025/03/03 13:11
Change comment: There is no comment for this version
To version 6.1
edited by Admin
on 2024/12/26 17:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,17 +7,15 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB, CAN and RS-485);
10 +* via bootloader (available via USB only);
11 11  * via device configuration interface (available via USB, CAN and TCP).
12 12  
13 13  The following hardware and software are required:
14 14  
15 15  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 -* Communication interface:
17 -** USB-CAN adapter for updating by CAN bus;
18 -** USB/RS-485 adapter for updating by RS-485 bus;
19 -** USB-mini cable for updating by USB;
20 -** BMS Wi-Fi или BMS LANmodule, установленные на плате BMS Main X — для обновления по TCP;
16 +* USB/CAN adapter for updating by CAN bus;
17 +* USB/RS-485 adapter for updating by RS-485 bus;
18 +* USB-mini cable for updating by USB;
21 21  * BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via configuration interface by TCP;
22 22  * Firmware file (must be in "Motorola S-record .srec" format).
23 23  
... ... @@ -61,11 +61,10 @@
61 61  
62 62  [[image:1733922048351-746.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
63 63  
64 -* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate (set up in BMS settings):
62 +* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate for the COM port:
65 65  
66 -[[image:1741006591120-110.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
64 +[[image:1733922048352-403.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
67 67  
68 -
69 69  2.3 Click the "Browse..." button and select the *.srec file with the main firmware.
70 70  
71 71  2.4 Click the “Update” button **while the device is in bootloader mode**. The process of loading the new firmware into the device memory will begin.
... ... @@ -79,11 +79,11 @@
79 79  
80 80  ~1. Perform connection to the device and user authentication in the Unified monitor.
81 81  
82 -2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button.
79 +2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button,
83 83  
84 84  [[image:1733922048352-144.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="164" width="600"]]
85 85  
86 -3. Select the "Motorola S-Record files (*.srec)" on the bottom right corner and specify the path to the file with the new main firmware (*.srec).
83 +3. Select the "Motorola S-Record files (*.srec)" on the bottom right corner and specify the path to the file with the new main firmware: (*.srec).
87 87  
88 88  [[image:1733922532918-136.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="301" width="527"]]
89 89  
1741006591120-110.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content
1741006631411-613.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -7.3 KB
Content