Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 12.1
edited by Admin
on 2025/03/03 13:05
Change comment: There is no comment for this version
To version 13.1
edited by Admin
on 2025/03/03 13:13
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,16 +7,18 @@
7 7  
8 8  Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB only);
10 +* via bootloader (available via USB, CAN and RS-485);
11 11  * via device configuration interface (available via USB, CAN and TCP).
12 12  
13 13  The following hardware and software are required:
14 14  
15 15  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 -* USB/CAN adapter for updating by CAN bus;
17 -* USB/RS-485 adapter for updating by RS-485 bus;
18 -* USB-mini cable for updating by USB;
19 -* BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via configuration interface by TCP;
16 +* Communication interface:
17 +** USB-CAN adapter for updating by CAN bus;
18 +** USB/RS-485 adapter for updating via bootloader by RS-485 bus;
19 +** USB-mini cable for updating by USB;
20 +** BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via configuration interface by TCP;
21 +* SD-card installed on BMS Mini S / BMS Mini for update via configuration interface;
20 20  * Firmware file (must be in "Motorola S-record .srec" format).
21 21  
22 22  == Updating via bootloader ==