Changes for page 5. Firmware update
Last modified by Admin on 2025/03/03 13:13
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -7,15 +7,17 @@ 7 7 8 8 Updating the BMS Mini device firmware can be done in the following ways: 9 9 10 -* via bootloader (available via USB only);10 +* via bootloader (available via USB, CAN and RS-485); 11 11 * via device configuration interface (available via USB, CAN and TCP). 12 12 13 13 The following hardware and software are required: 14 14 15 15 * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini; 16 -* USB/CAN adapter for updating by CAN bus; 17 -* USB/RS-485 adapter for updating by RS-485 bus; 18 -* USB-mini cable for updating by USB; 16 +* Communication interface: 17 +** USB-CAN adapter for updating by CAN bus; 18 +** USB/RS-485 adapter for updating by RS-485 bus; 19 +** USB-mini cable for updating by USB; 20 +** 19 19 * BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via configuration interface by TCP; 20 20 * Firmware file (must be in "Motorola S-record .srec" format). 21 21 ... ... @@ -59,7 +59,7 @@ 59 59 60 60 [[image:1733922048351-746.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]] 61 61 62 -* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate t o115200bit/sfor the COMport:64 +* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate (set up in BMS settings): 63 63 64 64 [[image:1741006591120-110.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]] 65 65