Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:13
From version 1.1
edited by Admin
on 2024/12/11 13:09
Change comment: There is no comment for this version
To version 5.3
edited by Admin
on 2024/12/26 17:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Mini S.WebHome
1 +Battery management systems.BMS Mini S.WebHome
Content
... ... @@ -3,34 +3,33 @@
3 3  
4 4  == Introduction ==
5 5  
6 -This document describes the steps for updating the BMS Mini 2 and BMS Mini S firmware.
6 +This document describes the steps for updating the BMS Mini S and BMS Mini firmware.
7 7  
8 -Updating the BMS Mini firmware can be done in the following ways:
8 +Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via RS-485 bus;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via bootloader (available via USB only);
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini 2 / Mini S.
18 -* USB/CAN adapter for updating via CAN bus.
19 -* USB/RS-485 adapter for updating via RS-485 bus.
15 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 +* USB/CAN adapter for updating via CAN bus;
17 +* USB-mini cable for updating via USB;
18 +* BMS Wi-Fi or BMS LANmodule installed on BMS Main 3 if updating via TCP
20 20  * Firmware file (must be in Motorola S-record format).
21 21  
21 +== Updating via bootloader ==
22 +
22 22  Firmware updating includes two steps:
23 23  
24 24  * starting the bootloader;
25 25  * uploading the firmware file to the BMS Mini flash memory.
26 26  
27 -== Updating via USB, CAN, RS-485 ==
28 -
29 29  **~1. Start the device bootloader.**
30 30  
31 31  * **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Mini device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
32 32  
33 -[[image:1733921952732-294.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
32 +[[image:1733921952732-294.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="166" width="600"]]
34 34  
35 35  * **Method 2**: hold the SW1 button on the device for 1 second. After the indication LEDs go out, release the button. A restart will be performed, and the device will enter bootloader mode.
36 36  
... ... @@ -47,7 +47,7 @@
47 47  
48 48  [[image:https://docs.movicomelectric.com/bin/download/Battery%20management%20systems/BMS%20Main%203/5.%20Firmware%20update/WebHome/1733406691402-715.png?rev=1.1||alt="1733406691402-715.png" data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="258" width="341"]]
49 49  
50 -[[image:1733922048348-345.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="300" width="281"]]
49 +[[image:1733922048348-345.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="357" width="334"]]
51 51  
52 52  2.2 From the drop-down menu of the Updater window, select the method of connecting to the BMS Mini device and configure the connection parameters (the "Settings..." button).
53 53  
... ... @@ -78,7 +78,7 @@
78 78  
79 79  2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button,
80 80  
81 -[[image:1733922048352-144.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="175" width="639"]]
80 +[[image:1733922048352-144.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="164" width="600"]]
82 82  
83 83  3. Select the "Motorola S-Record files (*.srec)" on the bottom right corner and specify the path to the file with the new main firmware: (*.srec).
84 84