Skip to Content

Changes for page 4.1 Signals

Last modified by Admin on 2025/02/27 09:30
From version 1.4
edited by Admin
on 2024/12/11 13:11
Change comment: Update document after refactoring.
To version 2.2
edited by Admin
on 2025/02/27 09:27
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,19 +6,11 @@
6 6  
7 7  States of the device's discrete inputs are available in the "Signals → Input discrete signal" section:
8 8  
9 -[[image:1733755484212-704.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="235" width="800"]]
9 +[[image:1740648341858-611.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="254" width="800"]]
10 10  
11 11  In this section:
12 12  
13 -* Battery cover – a signal from the battery cover;
14 -* Charger connected – a signal indicating that the charger is connected to the battery;
15 -* Power up/down request – a signal to power up or power down the BMS;
16 -* Inhibit charging – a command to inhibit closing the charging contactor;
17 -* Inhibit discharging – a command to inhibit closing the discharging contactor;
18 -* Insulation status – a signal from an external insulation monitoring device;
19 -* Charge request – a request for closing the charging contactor;
20 -* Precharge request – a request for closing the precharging contactor;
21 -* Discharge request – a request for closing the discharging contactor;
13 +* Input #1 - Input #4 – states of the inputs 1-4 respectively.
22 22  
23 23  States of the device's discrete outputs are available in the "Signals → Output discrete signals" section:
24 24  
1740648341858-611.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +25.8 KB
Content