Skip to Content

Changes for page 3.6 Connectivity

Last modified by Admin on 2025/04/15 15:45
From version 1.1
edited by Admin
on 2024/12/09 14:16
Change comment: There is no comment for this version
To version 2.5
edited by Admin
on 2025/02/26 17:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Mini S.3\. Configuration.WebHome
1 +Battery management systems.BMS Mini S.3\. Configuration.WebHome
Content
... ... @@ -27,7 +27,10 @@
27 27  * Ignore NMT messages – a flag to ignore NMT messages;
28 28  * Ignore SDO messages – a flag to forbid communication using the CANopen SDO protocol.
29 29  
30 -//**To apply new settings please restart the BMS Mini device.**//
30 +(% class="box infomessage" %)
31 +(((
32 +To apply new settings restart the BMS Mini device.
33 +)))
31 31  
32 32  === Modbus (RS-485) ===
33 33  
... ... @@ -43,14 +43,16 @@
43 43  * Address – a network address of the device;
44 44  * Baud rate – RS-485 bus baud rate.
45 45  
46 -//**To apply new settings please restart the BMS Mini device.**//
49 +(% class="box infomessage" %)
50 +(((
51 +To apply new settings restart the BMS Mini device.
52 +)))
47 47  
48 48  === Wi-Fi ===
49 49  
50 50  With the help of the BMS Wi-Fi module, the BMS Mini device supports connection to a Wi-Fi network.
51 51  
52 -To change the settings for connecting to a Wi-Fi network, select the "Connectivity →
53 -Wi-Fi" section:
58 +To change the settings for connecting to a Wi-Fi network, select the "Connectivity → Wi-Fi" section:
54 54  
55 55  [[image:1733753700107-856.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="103" width="800"]]
56 56  
... ... @@ -63,3 +63,24 @@
63 63  * SSID – a name of the Wi-Fi network;
64 64  * Password – a password to connect to the Wi-Fi network;
65 65  * Security type – a secure connection type.
71 +
72 +=== Cellular ===
73 +
74 +The BMS Mini device can connect to a cellular network if the BMS GSM communication module is installed on the device.
75 +
76 +To change the settings for connecting to a cellular network, select the "Connectivity → Cellular" section:
77 +
78 +
79 +In this section:
80 +
81 +* Enable – a flag to enable connection to a cellular network;
82 +* Module – version of BMS GSM module:
83 +** V1 (SIM7070G);
84 +* Use APN – a flag to enable APN;
85 +* APN: Name;
86 +* APN: User;
87 +* APN: Password;
88 +* Use PIN – a flag to enable the PIN code;
89 +* PIN number;
90 +
91 +To apply new settings please restart the BMS Main 3 device.