Settings

Connectivity

CAN

Информация о состоянии подключения к сети Wi-Fi находится в разделе «Connectivity – Wi-Fi»:

В данном разделе:

• Enable – флаг разрешения работы приёмопередатчика CAN;
• Node ID – идентификатор устройства в сети CANopen;
• Bus speed, kbit/s – скорость обмена по шине CAN;
  • 125;
  • 250;
  • 500;
  • 1000;
• Send TPDO messages – отправка сообщений TPDO на каждый пакет синхронизации Sync;
• Send Sync messages – включение отправки пакетов синхронизации (CANID = 0x80, длина данных 0 байт);
• Sync period – период отправки пакетов синхронизации, мс;
• Send Heartbeat messages – включение отправки Heartbeat-сообщений;
• Heartbeat period – период отправки Heartbeat-сообщений, мс;
• Ignore NMT messages – игнорирование командных сообщений сети CANopen;
• Ignore SDO messages – игнорирование протокола SDO в сети CANopen.

Modbus (RS-485)

The BMS Mini device support the Modbus RTU protocol over the RS-485 bus.

To change the parameters for connecting to the RS-485 bus, select the “Connectivity → Modbus (RS-485)” section:

In this section:

• Enable – a flag to enable the RS-485 transceiver;
• Address – a network address of the device;
• Baud rate – RS-485 bus baud rate.

Wi-Fi

With the help of the BMS Wi-Fi module, the BMS Mini device supports connection to a Wi-Fi network.

To change the settings for connecting to a Wi-Fi network, select the "Connectivity → Wi-Fi" section:

In this section:

• Enable – a flag to enable connection to a Wi-Fi network;
• Module – version of BMS Wi-Fi module:
  • V1 (CC3100MOD);
  • V2 (ESP32-C3);
• SSID – a name of the Wi-Fi network;
• Password – a password to connect to the Wi-Fi network;
• Security type – a secure connection type.

Cellular

The BMS Mini device can connect to a cellular network if the BMS GSM communication module is installed on the device.

To change the settings for connecting to a cellular network, select the "Connectivity → Cellular" section:

In this section:

• Enable – a flag to enable connection to a cellular network;
• Module – version of BMS GSM module:
  • V1 (SIM7070G);
• Use APN – a flag to enable APN;
• APN: Name;
• APN: User;
• APN: Password;
• Use PIN – a flag to enable the PIN code;
• PIN number;

LAN

The BMS Main 3 device can connect to a local area network if the BMS LANmodule communication module is installed on the device.

To change the settings for connecting to LAN, select the "Connectivity → LAN" section:

In this section:

• Enable – a flag to enable connection to a local network;
• Module – version of BMS LANmodule:
  • V1 (W5500);
• MAC – a MAC address of LANmodule;
• IP mode – a type of IP address:
  • Static – IP address is configured manually;
  • Dynamic – IP address is received from DHCP server;
• IP address – IP address (in static IP mode);
• Netmask – subnet mask (in static IP mode);
• Gateway address – address of a gateway (in static IP mode).