Skip to Content

Changes for page 3.5 External equipment

Last modified by Admin on 2025/02/26 17:09
From version 1.2
edited by Admin
on 2024/12/09 16:56
Change comment: Update document after refactoring.
To version 10.1
edited by Admin
on 2025/02/26 17:09
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Mini S BMS Mini 2.3\. Configuration.WebHome
1 +Battery management systems.BMS Mini S.3\. Configuration.WebHome
Content
... ... @@ -38,7 +38,7 @@
38 38  
39 39  Algorithm for working with the charger:
40 40  
41 -The BMS sends a command to charge the battery if the "Allow charging" flag is set (see section “Control → Charge”).
41 +The BMS sends a command to charge the battery if the "Allow charging" flag is set (see [[Charge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HCharge"]]).
42 42  
43 43  === Eltek charger ===
44 44  
... ... @@ -80,7 +80,7 @@
80 80  
81 81  Algorithm for working with the charger:
82 82  
83 -The BMS sends a command to charge the battery if the "Allow charging" flag is set (see section “Control → Charge”).
83 +The BMS sends a command to charge the battery if the "Allow charging" flag is set (see [[Charge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HCharge"]]).
84 84  
85 85  (% class="box warningmessage" %)
86 86  (((
... ... @@ -109,7 +109,7 @@
109 109  
110 110  Algorithm for working with the charger:
111 111  
112 -The BMS sends a command to charge the battery if the "Allow charging" flag is set (see section “Control → Charge”).
112 +The BMS sends a command to charge the battery if the "Allow charging" flag is set (see [[Charge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HCharge"]]).
113 113  
114 114  === Bassi charger ===
115 115  
... ... @@ -153,7 +153,7 @@
153 153  
154 154  Algorithm for working with the charger:
155 155  
156 -The BMS sends a command to charge the battery if the "Allow charging" flag is set (see section “Control → Charge”).
156 +The BMS sends a command to charge the battery if the "Allow charging" flag is set (see [[Charge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HCharge"]]).
157 157  
158 158  (% class="box infomessage" %)
159 159  (((
... ... @@ -179,7 +179,7 @@
179 179  
180 180  Algorithm for working with the charger:
181 181  
182 -The BMS sends a command to charge the battery if the "Allow charging" flag is set (see section “Control → Charge”).
182 +The BMS sends a command to charge the battery if the "Allow charging" flag is set (see [[Charge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HCharge"]]).
183 183  
184 184  (% class="box infomessage" %)
185 185  (((
... ... @@ -186,8 +186,54 @@
186 186  After changing the settings, restart the BMS Mini device.
187 187  )))
188 188  
189 -=== Sunny Island inverter ===
189 +=== Webasto charger ===
190 190  
191 +To change the parameters of communication with a Webasto charger, select the "External equipment → Chargers → Webasto charger" section:
192 +
193 +[[image:1733753316202-874.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="114" width="800"]]
194 +
195 +In this section:
196 +
197 +* Enable – a flag to enable communication with the charger;
198 +* Charger ID – a Webasto charger identifier in the CANopen network;
199 +* Charge voltage – maximum charging voltage, V;
200 +* Charge current – maximum charging current, A;
201 +* Set “Charger connected” signal if the charger is online – a flag to generate the “Charger connected” signal if connection with the charger is established.
202 +
203 +Algorithm for working with the charger:
204 +
205 +The BMS sends a command to charge the battery if the "Allow charging" flag is set (see [[Charge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HCharge"]]).
206 +
207 +(% class="box infomessage" %)
208 +(((
209 +After changing the settings, restart the BMS Mini device.
210 +)))
211 +
212 +=== Skytronic charger ===
213 +
214 +To change the parameters of communication with a Skytronic charger, select the "External equipment → Chargers → Skytronic charger" section:
215 +
216 +[[image:1733753316203-976.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="103" width="800"]]
217 +
218 +In this section:
219 +
220 +* Enable – a flag to enable communication with the charger;
221 +* Receive timeout – a timeout for receiving packets from the charger (if there is no data being received from the charger for a given time, the connection loss flag is set), millisecond;
222 +* Charge voltage – maximum charging voltage, V;
223 +* Charge current – maximum charging current, A;
224 +* Set “Charger connected” signal if the charger is online – a flag to generate the “Charger connected” signal if connection with the charger is established.
225 +
226 +Algorithm for working with the charger:
227 +
228 +The BMS sends a command to charge the battery if the "Allow charging" flag is set (see [[Charge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HCharge"]]).
229 +
230 +(% class="box infomessage" %)
231 +(((
232 +After changing the settings, restart the BMS Mini device.
233 +)))
234 +
235 +=== SMA Sunny Island inverter ===
236 +
191 191  To change the communication parameters with an SMA Sunny Island inverter, select the "External equipment → inverters → SMA Sunny Island inverter" section:
192 192  
193 193  [[image:1733753328053-956.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="136" width="800"]]
... ... @@ -205,6 +205,41 @@
205 205  
206 206  When working with the Sunny Island inverter, the BMS Mini device sends messages with the values of voltage and charge/discharge current continuously with the period “Output period”: Charging voltage, Charging current, Discharging voltage, Discharging current.
207 207  
254 +=== Pylontech inverter ===
255 +
256 +To change the parameters of communication with a Pylontech inverter, select the "External equipment → Inverters and loads → Pylontech inverter" section:
257 +
258 +[[image:1740580440283-115.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="126" width="800"]]
259 +
260 +In this section:
261 +
262 +* Enable – a flag to enable communication with the inverter;
263 +* Type – invertor type:
264 +** Pylontech;
265 +** Solis;
266 +* Charge voltage, V – maximum charging voltage, V;
267 +* Charge current, А – maximum charging current, A;
268 +* Discharge voltage (min) – minimum discharging voltage, V;
269 +* Discharge current – maximum discharging current, А.
270 +
271 +=== ASTOM load bank (cycling) ===
272 +
273 +To change the parameters of communication with a ASTOM load bank, select the "External equipment → Inverters and loads → ASTOM load bank (cycling)" section:
274 +
275 +[[image:1740580507794-408.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="190" width="800"]]In this section:
276 +
277 +* Enable – a flag to enable communication with the bank;
278 +* Number of discharge cycles;
279 +* Minimum voltage of charged cells, V;
280 +* Voltage deviation of charged cells – minimum allowable deviation of the cells voltage at which battery states as charged, V;
281 +* Maximum discharge current, A;
282 +* Cell voltage to stop discharging, V;
283 +* SOC to be at the end of cycling – target SOC at the end of charge-discharge cycling, V;
284 +* Delay before starting discharging – a delay before transmitting command to the load to start discharging, millisecond;
285 +* Check the difference between the min and max cell voltage – a flag to enable check of difference between the minimum and maximum cell voltages to generate an error;
286 +* Voltage difference – difference between the minimum and maximum cell voltages for error to be generated and cycling to be stopped, V;
287 +* Delay before setting the error – a delay before generating an error, second.
288 +
208 208  === HYG Class I-III truck ===
209 209  
210 210  The HYG Class I-III equipment is installed on the forklifts by the group of companies HYSTER-YALE.
... ... @@ -252,7 +252,7 @@
252 252  
253 253  To change communication parameters with a Combilift forklift, select the "External equipment → Trucks and Vehicles → Combilift truck" section:
254 254  
255 -[[image:1733753328056-822.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="158" width="800"]]
336 +[[image:1740580581620-608.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="169" width="800"]]
256 256  
257 257  In this section:
258 258  
... ... @@ -262,6 +262,7 @@
262 262  * Receive timeout – a timeout for receiving packets from the forklift (if no data is being received from the forklift during this time, the “Combilift offline“ flag is set), millisecond; at a value of 0 milliseconds, the "Combilift offline" error does not occur;
263 263  * Inhibit charging on the "Combilift offline" error – a flag to forbid charging if the "Combilift offline" error is generated;
264 264  * Inhibit discharging on "Combilift offline" error – a flag to forbid discharging if the "Combilift offline" error is generated;
346 +* Do not set the "Combilift offline" error on the "Charger connected" signal;
265 265  * SOC: Limited operation – a SOC level, at which the forklift goes into a state of limited functionality, %;
266 266  * SOC: Lift lockout – a SOC level, at which the forklift locks the lift, %;
267 267  * Send Heartbeat messages – a flag to enable generation of the Heartbeat messages to forklift;
... ... @@ -362,7 +362,7 @@
362 362  
363 363  In this state, the discharging contactor is **open** and the "Crown error" is generated. If the "Inhibit discharging on the EWS signal" is not set, then after T = 10 seconds, the "Crown error" is cleared and the transition to the "Discharging Off" state is performed.
364 364  
365 -The value of T is set in the "Delay before starting discharging" field (see section “Control → Discharge”).
447 +The value of T is set in the "Delay before starting discharging" field (see [[Discharge>>doc:Battery management systems.BMS Mini S.3\. Configuration.3\.3 Control.WebHome||anchor="HDischarge"]]).
366 366  
367 367  (% class="box infomessage" %)
368 368  (((
... ... @@ -369,52 +369,6 @@
369 369  After changing the settings, restart the BMS Mini device.
370 370  )))
371 371  
372 -=== Webasto charger ===
373 -
374 -To change the parameters of communication with a Webasto charger, select the "External equipment → Chargers → Webasto charger" section:
375 -
376 -[[image:1733753316202-874.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="114" width="800"]]
377 -
378 -In this section:
379 -
380 -* Enable – a flag to enable communication with the charger;
381 -* Charger ID – a Webasto charger identifier in the CANopen network;
382 -* Charge voltage – maximum charging voltage, V;
383 -* Charge current – maximum charging current, A;
384 -* Set “Charger connected” signal if the charger is online – a flag to generate the “Charger connected” signal if connection with the charger is established.
385 -
386 -Algorithm for working with the charger:
387 -
388 -The BMS sends a command to charge the battery if the "Allow charging" flag is set (see section “Control → Charge”).
389 -
390 -(% class="box infomessage" %)
391 -(((
392 -After changing the settings, restart the BMS Mini device.
393 -)))
394 -
395 -=== Skytronic charger ===
396 -
397 -To change the parameters of communication with a Skytronic charger, select the "External equipment → Chargers → Skytronic charger" section:
398 -
399 -[[image:1733753316203-976.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="103" width="800"]]
400 -
401 -In this section:
402 -
403 -* Enable – a flag to enable communication with the charger;
404 -* Receive timeout – a timeout for receiving packets from the charger (if there is no data being received from the charger for a given time, the connection loss flag is set), millisecond;
405 -* Charge voltage – maximum charging voltage, V;
406 -* Charge current – maximum charging current, A;
407 -* Set “Charger connected” signal if the charger is online – a flag to generate the “Charger connected” signal if connection with the charger is established.
408 -
409 -Algorithm for working with the charger:
410 -
411 -The BMS sends a command to charge the battery if the "Allow charging" flag is set (see section “Control → Charge”).
412 -
413 -(% class="box infomessage" %)
414 -(((
415 -After changing the settings, restart the BMS Mini device.
416 -)))
417 -
418 418  === ZiK truck ===
419 419  
420 420  To change communication parameters with a ZiK truck, select the "External equipment → Trucks and Vehicles → ZiK truck" section:
... ... @@ -423,11 +423,10 @@
423 423  
424 424  In this section:
425 425  
426 -* Settings:
427 -** Enable – a flag to enable communication with the ZiK truck;
428 -** Node ID – a ZiK identifier in the CANopen network;
429 -** SOC: Limited operation – a SOC level at which the truck goes to limited operation mode, %;
430 -** Send supercapacitor parameters – a flag to enable transmitting the supercapacitor parameters.
462 +* Enable – a flag to enable communication with the ZiK truck;
463 +* Node ID – a ZiK identifier in the CANopen network;
464 +* SOC: Limited operation – a SOC level at which the truck goes to limited operation mode, %;
465 +* Send supercapacitor parameters – a flag to enable transmitting the supercapacitor parameters.
431 431  
432 432  The BMS with the identifier “Node ID” continuously transmits to the truck the control commands with a period of 100 milliseconds.
433 433  
... ... @@ -451,6 +451,34 @@
451 451  * Receive vehicle messages – a flag to activate receiving vehicle messages;
452 452  * First vehicle message ID – an identifier of the first message of the vehicle in the J1939 network.
453 453  
489 +=== Bender iso165C ===
490 +
491 +To change communication parameters with a Bender iso165C, select the "External equipment → IMD → Bender iso165C" section:
492 +
493 +[[image:1740580850472-138.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="125" width="800"]]
494 +
495 +In this section:
496 +
497 +* Enable – a flag to enable communication with the IMD;
498 +* Receive timeout – a timeout for receiving packets from the IMD, millisecond;
499 +* Configure the IMD thresholds – a flag to enable the threshold values for generating insulation error and insulation warning;
500 +* Threshold to detect insulation error – threshold resistance value to generate the insulation error, Ohm;
501 +* Threshold to detect insulation warning – threshold resistance value to generate the insulation warning, Ohm.
502 +
503 +=== BMS IMD ===
504 +
505 +To change communication parameters with a BMS IMD, select the "External equipment → IMD → BMD IMD " section:
506 +
507 +[[image:1740580889560-625.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="123" width="800"]]
508 +
509 +In this section:
510 +
511 +* Enable – a flag to enable communication with the IMD;
512 +* Node ID – a CANopen address of the BMS IMD device;
513 +* Configure the IMD thresholds – a flag to override the IMD warning and alarm settings;
514 +* Threshold to detect insulation alarm, Ohm;
515 +* Threshold to detect insulation warning, Ohm.
516 +
454 454  === Main X ===
455 455  
456 456  The BMS Mini device can connect to BMS Main X strings controller.
1740580440283-115.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
1740580507794-408.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +32.4 KB
Content
1740580581620-608.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +30.2 KB
Content
1740580850472-138.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +18.3 KB
Content
1740580889560-625.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +17.2 KB
Content