Changes for page 3.4 Protections

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -309,6 +309,35 @@
309	309	If there is the "Cell count error", the **“Critical error” **is generated.
310	310	)))
311	311
	312	+=== Temperature sensor count ===
	313	+
	314	+To change the protection parameters from the mismatch of the number of temperature sensors to the set value, select the "Protections → Temperature sensor count" section:
	315	+
	316	+[[image:1762773073782-768.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="130" width="800"]]
	317	+
	318	+In this section:
	319	+
	320	+* Enable – a flag to enable the protection;
	321	+* Number of cells – a number of temperature sensors connected to the BMS;
	322	+* Delay before setting the error, millisecond;
	323	+* Delay before clearing the error, second;
	324	+* Lock – a flag to block the error until the device is restarted.
	325	+
	326	+As a result of the operation of the protection from the mismatch of the number of cells, the "T-sensor count error" is generated.
	327	+
	328	+Error generation conditions:
	329	+
	330	+* the number of temperature sensors connected to the BMS is **not equal** to the “Number of temperature sensors” value during the “Delay before setting the error” time.
	331	+
	332	+Conditions for removing the error:
	333	+
	334	+* the number of temperature sensors connected to the BMS is **equal** to the “Number of temperature sensors” value during the “Delay before clearing the error” time.
	335	+
	336	+(% class="box warningmessage" %)
	337	+(((
	338	+If there is the "T-sensor count error", the **“Critical error” **is generated**.**
	339	+)))
	340	+
312	312	=== Short circuit ===
313	313
314	314	The BMS Mini device implements a protection of power circuits (contactors, power wires) against overheating caused by the flow of high current for a long time.