Changes for page 3.4 Protections

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -211,7 +211,7 @@
211	211
212	212	(% class="box warningmessage" %)
213	213	(((
214		-If there is the " Cell monitor offline error", the **“Critical error” **is generated.
	214	+If there is the " Cell monitor offline error", the **“Critical error” **is generated and** all contactors open.**
215	215	)))
216	216
217	217	=== Cell count ===
...	...	@@ -240,7 +240,7 @@
240	240
241	241	(% class="box warningmessage" %)
242	242	(((
243		-If there is the "Cell count error", the **“Critical error” **is generated.
	243	+If there is the "Cell count error", the **“Critical error” **is generated and **all contactors open.**
244	244	)))
245	245
246	246	=== Short circuit ===
...	...	@@ -272,6 +272,11 @@
272	272
273	273	* the current modulo is lower than the “Maximum current” values for all three protection levels during the “Delay before setting the error” time.
274	274
	275	+(% class="box infomessage" %)
	276	+(((
	277	+If there is the "Short circuit" error, the **charging **contactor opens (the “Switch off the charging contactor on error” flag is set) and the **discharging **contactor opens (the “Switch off the discharging contactor on error flag” is set).
	278	+)))
	279	+
275	275	=== High contactor temperature ===
276	276
277	277	The BMS Mini device protects power contactors from overheating. To measure the temperature of the contactor, one of the thermistors connected to the X6 connector is used.
...	...	@@ -335,7 +335,7 @@
335	335
336	336	(% class="box warningmessage" %)
337	337	(((
338		-If there is the “Current sensor error”, the **“Critical error” **is generated.
	343	+If there is the “Current sensor error”, the **“Critical error” **is generated and** all contactors open.**
339	339	)))
340	340
341	341	=== Charge contactor cycles ===