Skip to Content

Changes for page 3.2 Inputs and outputs

Last modified by Admin on 2025/02/24 11:11
From version 3.3
edited by Admin
on 2025/01/28 14:43
Change comment: There is no comment for this version
To version 2.6
edited by Admin
on 2025/01/28 14:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -140,13 +140,9 @@
140 140  
141 141  === Wire resistance compensation ===
142 142  
143 -(% class="box warningmessage" %)
144 -(((
145 -**Warning!**
146 -This section applies only to **BMS Mini S v1.0 **and **BMS Mini v2.0 (device)**.
147 -)))
143 +The BMS Mini is powered directly from the battery. There is a special header X9 for this.
148 148  
149 -The BMS Mini is powered directly from the battery. This causes the voltages of th fisrt and the last cells to be measured with an error, the magnitude of which is proportional to the current drawn by the BMS and the resistance of the wires connecting these cells to the BMS. To compensate for the cell voltage measurement error, the BMS Mini provides a wire resistance setting.
145 +But it is possible to use battery  wires from X8 header.This causes the voltages of the first and last battery cells to be measured with an error, the magnitude of which is proportional to the current drawn by the BMS and the resistance of the wires connecting these cells to the BMS. To compensate for the cell voltage measurement error, the BMS Mini provides a wire resistance setting.
150 150  
151 151  Setting the resistance of the wires connecting the first and last cells of the battery with the BMS is performed in the “Signals → Wire resistance compensation” section:
152 152