Skip to Content

Changes for page 3.1 General information

Last modified by Admin on 2025/03/27 15:21
From version 1.4
edited by Admin
on 2024/12/11 13:11
Change comment: Update document after refactoring.
To version 2.2
edited by Admin
on 2024/12/26 17:32
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,11 @@
1 -This document describes settings and states of the BMS Mini device. Configuration is carried out via the USB bus using the ElectricDeviceMonitor v1.17.3 or later (available by the [[link>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]).
1 +Configuring can be done using the ElectricDeviceMonitor above the 1.17.3 (available by the [[link>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) via
2 2  
3 -The USB-miniUSB cable (connector X2) is used to connect the BMS Mini device to a PC. After connecting, the device is identified as a device with a serial interface (COM port) as in the figure below:
3 +* USB;
4 +* CAN bus (Systec, PEAK, Marathon and USB-CAN adapters are supported);
5 +* TCP connection (BMS Wi-Fi or BMS LANmodule must be installed on BMS Main 3).
4 4  
7 +After connecting, the device is identified as a device with a serial interface (COM port) as in the figure below:
8 +
5 5  [[image:1733743515976-982.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
6 6  
7 7  To connect to the device, launch ElectricDeviceMonitor, select "Unified monitor" in the main program window, specify the name of the device's COM port, and click the "Launch monitor" button: