Wiki source code of 1. Technical specifications
Last modified by Admin on 2025/05/13 17:21
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.1 | 1 | (% data-numbered-headings-start="1" style="--numbered-headings-start: 0;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %) |
| |
2.1 | 2 | = Technical specifications = |
| |
1.1 | 3 | |
| |
4.1 | 4 | [[image:1734098499251-558.png||data-xwiki-image-style-alignment="center" height="244" width="450"]] |
| 5 | |||
| |
2.1 | 6 | BMS Mini S is a miniature full-featured centralized BMS for high-capacity lithium-ion batteries. It has many communication interfaces, an ability to collect information during the entire battery lifetime and an integrated DC/DC converter. |
| |
1.1 | 7 | |
| 8 | == Specifications == | ||
| 9 | |||
| |
7.2 | 10 | (% style="width:640px" %) |
| 11 | |(% style="width:410px" %)**Parameter**|(% style="width:225px" %)**Value** | ||
| |
10.1 | 12 | |(% style="width:410px" %)Battery voltage, V|(% style="width:225px" %)11* to 52 |
| |
7.1 | 13 | |(% style="width:410px" %)((( |
| |
2.1 | 14 | Current consumption @36 V, mA (maximum): |
| |
1.1 | 15 | |
| 16 | work (no load) | ||
| 17 | standby | ||
| |
7.2 | 18 | )))|(% style="width:225px" %)((( |
| |
1.1 | 19 | |
| 20 | |||
| 21 | 30 | ||
| |
2.1 | 22 | 0.3 |
| |
1.1 | 23 | ))) |
| |
7.2 | 24 | |(% style="width:410px" %)Number of cells|(% style="width:225px" %)4 to 12 |
| 25 | |(% style="width:410px" %)Cell balancing type|(% style="width:225px" %)Passive | ||
| 26 | |(% style="width:410px" %)Cell balancing current, mA, @ 4.2 V|(% style="width:225px" %)220 | ||
| |
16.1 | 27 | |(% style="width:410px" %)Cell voltage measurement error, V|(% style="width:225px" %)±0.003 |
| 28 | |(% style="width:410px" %)Cell temperature measurement error, °С|(% style="width:225px" %)±2 | ||
| |
7.2 | 29 | |(% style="width:410px" %)Output voltage of the internal DC/DC converter, V|(% style="width:225px" %)12 ± 1 |
| 30 | |(% style="width:410px" %)Output current of the internal DC/DC converter, A (maximum)|(% style="width:225px" %)3 | ||
| |
15.1 | 31 | |(% style="width:410px" %)Number of programmable MOSFETs for contactors (40V, 5A)|(% style="width:225px" %)4 |
| |
7.2 | 32 | |(% style="width:410px" %)Number of programmable discrete inputs (dry contact)|(% style="width:225px" %)4 |
| |
15.1 | 33 | |(% style="width:410px" %)Number of programmable discrete outputs (5V, total 200mA)|(% style="width:225px" %)4 |
| |
7.2 | 34 | |(% style="width:410px" %)Current sensor type|(% style="width:225px" %)Hall-Effect sensor, bidirectional (LEM series: HASS, HTFS, DHAB) |
| 35 | |(% style="width:410px" %)Interfaces|(% style="width:225px" %)1xCAN / 1xRS-485 / 1xUSB | ||
| 36 | |(% style="width:410px" %)CAN output voltage, V|(% style="width:225px" %)5.0 ± 0.5 | ||
| 37 | |(% style="width:410px" %)CAN output current, mA (maximum)|(% style="width:225px" %)400 | ||
| 38 | |(% style="width:410px" %)Dimensions (length × width × height), mm|(% style="width:225px" %)125 × 117 × 17 | ||
| |
15.1 | 39 | |(% style="width:410px" %)Weight, g|(% style="width:225px" %)210 ± 20 |
| |
7.2 | 40 | |(% style="width:410px" %)Operating temperature range, °С|(% style="width:225px" %)-40 to +85 |
| 41 | |(% style="width:410px" %)Headers X1, X3-X9 type|(% style="width:225px" %)Molex series Micro-Fit | ||
| |
1.1 | 42 | |
| |
3.1 | 43 | * The minimum voltage for the internal 12V DC/DC converter is 14 Volts. |
| 44 | |||
| |
2.1 | 45 | == Overall and mounting dimensions == |
| |
1.1 | 46 | |
| |
18.1 | 47 | [[image:1747156865190-759.png||data-xwiki-image-style-alignment="center" height="530" width="450"]] |
| |
1.1 | 48 | |
| 49 | == Typical battery system == | ||
| 50 | |||
| 51 | Typical battery system based on the BMS Mini is shown on figure below. | ||
| 52 | |||
| |
2.1 | 53 | [[image:1733740624419-743.png||data-xwiki-image-style-alignment="center"]] |
| |
1.1 | 54 | |
| 55 |