Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/03/03 13:33
From version 1.1
edited by Admin
on 2024/12/16 14:27
Change comment: There is no comment for this version
To version 12.1
edited by Admin
on 2025/03/03 13:33
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Main X.WebHome
1 +Battery management systems.BMS Main X.WebHome
Content
... ... @@ -5,30 +5,30 @@
5 5  
6 6  This document describes the steps for updating the BMS Main X firmware.
7 7  
8 -Updating the BMS Main X firmware can be done in the following ways:
8 +Updating the BMS Mini device firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via RS-485 bus;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via bootloader (available via USB only);
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main X.
18 -* USB/CAN adapter for updating via CAN bus.
19 -* USB/RS-485 adapter for updating via RS-485 bus.
20 -* Firmware file (must be in Motorola S-record format).
15 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Mini S / BMS Mini;
16 +* USB/CAN adapter for updating by CAN bus;
17 +* USB/RS-485 adapter for updating by RS-485 bus;
18 +* USB-mini cable for updating by USB;
19 +* BMS Wi-Fi or BMS LANmodule installed on BMS Mini device if updating via configuration interface by TCP;
20 +* Firmware file (must be in "Motorola S-record .srec" format).
21 21  
22 +== Updating via bootloader ==
23 +
22 22  Firmware updating includes two steps:
23 23  
24 24  * starting the bootloader;
25 25  * uploading the firmware file to the BMS Main X flash memory.
26 26  
27 -== Updating via USB, CAN, RS-485 ==
28 -
29 29  **~1. Start the device bootloader.**
30 30  
31 -* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Main X 2.x device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
31 +* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Main X device via the USB, CAN or TCP connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
32 32  
33 33  [[image:1734358998052-615.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="176" width="600"]]
34 34  
... ... @@ -45,11 +45,11 @@
45 45  
46 46  2.1 Launch the ElectricDeviceMonitor’s Updater module:
47 47  
48 -[[image:1734358998055-796.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
48 +[[image:Battery management systems.BMS Main 3.5\. Firmware update.WebHome@1733406691402-715.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="340" width="450"]]
49 49  
50 -[[image:1734358998056-742.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
50 +[[image:1734358998056-742.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="339" width="317"]]
51 51  
52 -2.2 From the drop-down menu of the Updater window, select the method of connecting to the BMS Main X 2.x device and configure the connection parameters (the "Settings..." button).
52 +2.2 From the drop-down menu of the Updater window, select the method of connecting to the BMS Main X device and configure the connection parameters (the "Settings..." button).
53 53  
54 54  * **USB connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device (the baud rate can be set to any):
55 55  
... ... @@ -59,10 +59,9 @@
59 59  
60 60  [[image:1734358998057-856.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
61 61  
62 -* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate for the COM port:
62 +* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate (set up in BMS settings):
63 63  
64 -[[image:1734358998058-447.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
65 -
64 +[[image:1741006568192-944.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
66 66  
67 67  2.3 Click the "Browse..." button and select the *.srec file with the main firmware.
68 68  
... ... @@ -77,13 +77,19 @@
77 77  
78 78  ~1. Perform connection to the device and user authentication in the Unified monitor.
79 79  
80 -2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button and specify the path to the file with the new main firmware (*.srec).
79 +2. Select the “Device → Update firmware…” menu item. In the appeared window, click the “Browse…” button.
81 81  
82 82  [[image:1734358998059-777.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="171" width="600"]]
83 83  
84 -3. Click the "Update" button. The file will begin transferring to the device. Once the transfer is complete, the device will reboot, and the main firmware update will begin. The update takes approximately 2 minutes.
83 +3. Select the "Motorola S-Record files (*.srec)" on the bottom right corner and specify the path to the file with the new main firmware (*.srec).
85 85  
86 -[[image:1734358998059-753.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
85 +[[image:1741008675778-571.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="244" width="450"]]
87 87  
87 +4. Click the "Update" button. The file will begin transferring to the device. Once the transfer is complete, the device will reboot, and the main firmware update will begin. The update takes approximately 2 minutes.
88 +
89 +
90 +
91 +(% contenteditable="false" tabindex="-1" style="background-image:url(https://docs.movicomelectric.com/webjars/wiki%3Axwiki/xwiki-platform-ckeditor-webjar/16.9.0/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:1741008480601-900.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
92 +
88 88  (% data-numbered-headings-start="5" style="--numbered-headings-start: 4;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
89 89  = Firmware update =
1741006568192-944.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +6.9 KB
Content
1741008351971-990.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +34.8 KB
Content
1741008394277-940.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +12.2 KB
Content
1741008480601-900.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +8.0 KB
Content
1741008555296-765.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +30.9 KB
Content
1741008675778-571.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +21.7 KB
Content