Skip to Content

Wiki source code of 3.6 Connectivity

Version 6.1 by Admin on 2025/03/03 10:29
Show last authors
1 (% data-numbered-headings-start="3" style="--numbered-headings-start: 2;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 = Settings =
3
4 (% data-numbered-headings-start="6" style="--numbered-headings-start: 5;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
5 == Connectivity ==
6
7 === CAN (external) ===
8
9 To change the parameters of the external CAN bus, designed to configure the device and interact with the upper-level system, select the "Connectivity - CAN (external)" section:
10
11 [[image:1740997082721-253.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="219" width="800"]]
12
13 In this section:
14
15 * Enable – a flag to enable the CAN bus transceiver;
16 * Node ID – an identifier of the device in the CANopen network;
17 * Bus speed – CAN bus baud rate;
18 * Send TPDO messages – a flag to enable sending TPDO messages on each Sync message;
19 * Send Sync messages – a flag to enabled sending Sync messages (CANID = 0x80, no data);
20 * Sync period – a period of sending Sync messages, ms;
21 * Send Heartbeat messages – a flag to enable sending Heartbeat messages;
22 * Heartbeat period – a period of sending Heartbeat messages, ms;
23 * Ignore NMT messages – a flag to ignore NMT messages;
24 * Ignore SDO messages – a flag to forbid communication using the CANopen SDO protocol.
25 * CLI: Master ID – message ID for transmitting CLI-commands to the device;
26 * CLI: Slave ID - message ID for receiving CLI-answers from the device.
27
28 (% class="box infomessage" %)
29 (((
30 To apply new settings please restart the BMS Main X.
31 )))
32
33 === CAN (internal) ===
34
35 To change the parameters of the internal CAN bus designed to interact with battery modules based on BMS Main 2.x or BMS Mini S / BMS Mini, select the "Connectivity - CAN (internal)" section:
36
37 [[image:1740997142807-180.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="125" width="800"]]
38
39 In this section:
40
41 * Enable – a flag to enable the CAN bus transceiver;
42 * Bus speed – CAN bus baud rate.
43
44 (% class="box infomessage" %)
45 (((
46 To apply new settings please restart the BMS Main X.
47 )))
48
49 === Modbus (RS-485) ===
50
51 The BMS Main X device supports the Modbus RTU protocol over the RS-485 bus.
52
53 To change the parameters for connecting to the RS-485 bus, select the “Connectivity – Modbus (RS-485)” section:
54
55 [[image:1740997252420-589.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="134" width="800"]]
56
57 In this section:
58
59 * Enable – a flag to enable the RS-485 transceiver;
60 * Address – a network address of the device;
61 * Baud rate – RS-485 bus baud rate.
62
63 (% class="box infomessage" %)
64 (((
65 To apply new settings please restart the BMS Main X.
66 )))
67
68 === Wi-Fi ===
69
70 With the help of the BMS Wi-Fi module, the BMS Main X supports connection to a Wi-Fi network.
71
72 To change the settings for connecting to a Wi-Fi network, select the "Connectivity - Wi-Fi" section:
73
74 [[image:Battery management systems.BMS Main 3.3\. Configuration.3\.6 Connectivity.WebHome@1733331899785-399.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="103" width="800"]]
75
76
77 In this section:
78
79 * Enable – a flag to enable connection to a Wi-Fi network;
80 * SSID – a name of the Wi-Fi network;
81 * Password – a password to connect to the Wi-Fi network;
82 * Security type – a secure connection type.
83
84 (% class="box infomessage" %)
85 (((
86 To apply new settings please restart the BMS Main X.
87 )))
88
89 === Cellular ===
90
91 The BMS Main X device can connect to a cellular network if the BMS GSM communication module is installed on the device.
92
93 To change the settings for connecting to a cellular network, select the "Connectivity → Cellular" section:
94
95 [[image:Battery management systems.BMS Main 3.3\. Configuration.3\.6 Connectivity.WebHome@1733331899787-178.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="127" width="800"]]In this section:
96
97 * Enable – a flag to enable connection to a cellular network;
98 * Module – version of BMS GSM module:
99 ** V1 (SIM7070G);
100 * Use APN – a flag to enable APN;
101 * APN: Name;
102 * APN: User;
103 * APN: Password;
104 * Use PIN – a flag to enable the PIN code;
105 * PIN number;
106
107 (% class="box infomessage" %)
108 (((
109 To apply new settings please restart the BMS Main X device.
110 )))
111
112 === LAN ===
113
114 The BMS Main X device can connect to a local area network if the BMS LANmodule communication module is installed on the device.
115
116 To change the settings for connecting to LAN, select the "Connectivity → LAN" section:
117
118 [[image:Battery management systems.BMS Main 3.3\. Configuration.3\.6 Connectivity.WebHome@1733331899788-489.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="117" width="800"]]In this section:
119
120 * Enable – a flag to enable connection to a local network;
121 * Module – version of BMS LANmodule:
122 ** V1 (W5500);
123 * MAC – a MAC address of LANmodule;
124 * IP mode – a type of IP address:
125 ** Static – IP address is configured manually;
126 ** Dynamic – IP address is received from DHCP server;
127 * IP address – IP address (in static IP mode);
128 * Netmask – subnet mask (in static IP mode);
129 * Gateway address – address of a gateway (in static IP mode).
130
131 (% class="box infomessage" %)
132 (((
133 To apply new settings please restart the BMS Main X device.
134 )))