Skip to Content

Changes for page 3.4 Protections

Last modified by Admin on 2025/06/11 15:57
From version 8.6
edited by Admin
on 2025/02/28 15:24
Change comment: There is no comment for this version
To version 8.2
edited by Admin
on 2025/02/28 15:22
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -215,7 +215,7 @@
215 215  
216 216  Protection against current unbalance of battery modules is configured in the section "Protections - Current unbalance":
217 217  
218 -[[image:Battery management systems.BMS Main 3X.3\. Configuration.3\.4 Protections.WebHome@1734090244843-403.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="116" width="800"]]
218 +[[image:1734356793451-440.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="103" width="800"]]
219 219  
220 220  In this section:
221 221  
... ... @@ -234,10 +234,7 @@
234 234  
235 235  * the current of the battery module is less than the "Maximum current" value during the "Delay before clearing the error" time.
236 236  
237 -(% class="box infomessage" %)
238 -(((
239 -If there is the “Current unbalance (CH)” or "Current unbalance (DCH)" error, **corresponding battery module opens its charging or discharging contactor**.
240 -)))
237 +If there is the error "Current unbalance (CH)" ("Current unbalance (DCH)"), the charging (discharging) contactor of the battery module opens.
241 241  
242 242  === Charging current unbalance (in “Charging” state) ===
243 243  
... ... @@ -263,10 +263,7 @@
263 263  
264 264  * battery module is included in the largest group of modules with similar charge currents during the “Delay before clearing the error” time.
265 265  
266 -(% class="box infomessage" %)
267 -(((
268 -If there is the “Charging current unbalance” error, **corresponding battery module opens its charging contactor**.
269 -)))
263 +If there is the “Charging current unbalance” error, the battery module charging contactor opens.
270 270  
271 271  === Discharging current unbalance ===
272 272  
... ... @@ -292,19 +292,8 @@
292 292  
293 293  * battery module is included in the largest group of modules with similar discharge currents during the “Delay before clearing the error” time.
294 294  
295 -(% class="box infomessage" %)
296 -(((
297 -If there is the “Discharging current unbalance” error, **corresponding battery module opens its discharging contactor**.
298 -)))
289 +If there is the “Discharging current unbalance” error, the battery module discharging contactor opens.
299 299  
300 -=== High contactor tempe ===
301 -
302 -=== WDT reset ===
303 -
304 -If the BMS firmware hangs, the watchdog timer resets the device. The BMS can detect that the device was reset and generates the “WDT reset” error.
305 -
306 -To change the parameters of the watchdog protection, select the "Protections → WDT reset" section:
307 -
308 308  === Critical error ===
309 309  
310 310  Parameters for generating the critical error are configured in the "Protections - Critical error" section: