Changes for page 3.4 Protections

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -223,20 +223,19 @@
223	223	* Maximum current – a maximum allowable self-balancing current of battery modules, A;
224	224	* Delay before setting the error;
225	225	* Delay before clearing the error;
226		-* Check all the time (not only in the ‘Balancing’ state) – a flag to enable voltage check not only in “Balancing” state;
227	227	* Lock – a flag to block the error until the device is restarted.
228	228
229	229	As a result of the operation of the current unbalance protection the errors “Current unbalance (CH)” and “Current unbalance (DCH)” are generated. Conditions for generating the error:
230	230
231		-* the current of the battery module is greater than the "Maximum current" value during the "Delay before setting the error" time.
	230	+* current of the battery module is greater than the "Maximum current" value during the "Delay before setting the error" time.
232	232
233	233	Conditions for clearing the error:
234	234
235		-* the current of the battery module is less than the "Maximum current" value during the "Delay before clearing the error" time.
	234	+* current of the battery module is less than the "Maximum current" value during the "Delay before clearing the error" time.
236	236
237	237	If there is the error "Current unbalance (CH)" ("Current unbalance (DCH)"), the charging (discharging) contactor of the battery module opens.
238	238
239		-=== Charging current unbalance (in “Charging” state) ===
	238	+=== Charging current unbalance ===
240	240
241	241	During battery charging, the currents of the battery modules may vary. The BMS Main X device detects modules whose charging currents are significantly different from the currents of other modules and generates the “Charging current unbalance” errors for them.
242	242