Changes for page 3.4 Protections

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -223,19 +223,20 @@
223	223	* Maximum current – a maximum allowable self-balancing current of battery modules, A;
224	224	* Delay before setting the error;
225	225	* Delay before clearing the error;
	226	+* Check all the time (not only in the ‘Balancing’ state) – a flag to enable voltage check not only in “Balancing” state;
226	226	* Lock – a flag to block the error until the device is restarted.
227	227
228	228	As a result of the operation of the current unbalance protection the errors “Current unbalance (CH)” and “Current unbalance (DCH)” are generated. Conditions for generating the error:
229	229
230		-* current of the battery module is greater than the "Maximum current" value during the "Delay before setting the error" time.
	231	+* the current of the battery module is greater than the "Maximum current" value during the "Delay before setting the error" time.
231	231
232	232	Conditions for clearing the error:
233	233
234		-* current of the battery module is less than the "Maximum current" value during the "Delay before clearing the error" time.
	235	+* the current of the battery module is less than the "Maximum current" value during the "Delay before clearing the error" time.
235	235
236	236	If there is the error "Current unbalance (CH)" ("Current unbalance (DCH)"), the charging (discharging) contactor of the battery module opens.
237	237
238		-=== Charging current unbalance ===
	239	+=== Charging current unbalance (in “Charging” state) ===
239	239
240	240	During battery charging, the currents of the battery modules may vary. The BMS Main X device detects modules whose charging currents are significantly different from the currents of other modules and generates the “Charging current unbalance” errors for them.
241	241