Skip to Content

Changes for page 3.1 General information

Last modified by Admin on 2025/03/27 15:21
From version 2.2
edited by Admin
on 2025/02/28 12:41
Change comment: There is no comment for this version
To version 2.1
edited by Admin
on 2024/12/26 17:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,8 +1,10 @@
1 -Настройка осуществляется с помощью программы ElectricDeviceMonitor версии не ниже 1.17.3 (доступна по [[ссылке>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) по
1 +This document describes settings and states of the BMS Main X device.
2 2  
3 +Configuring can be done using the ElectricDeviceMonitor above the 1.17.3 (available by the [[link>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) via
4 +
3 3  * USB;
4 -* CAN bus (поддерживаются адаптеры Systec, PEAK, Marathon и USB-CAN);
5 -* TCP connection (для этого должны быть установлены BMS Wi-Fi или BMS LANmodule).
6 +* CAN bus (Systec, PEAK, Marathon and USB-CAN adapters are supported);
7 +* TCP connection (BMS Wi-Fi or BMS LANmodule must be installed on BMS Main X).
6 6  
7 7  After connecting, the device is identified as a device with a serial interface (COM port) as in the figure below:
8 8