Skip to Content

Changes for page 3.1 General information

Last modified by Admin on 2025/03/27 15:21
From version 2.1
edited by Admin
on 2024/12/26 17:48
Change comment: There is no comment for this version
To version 2.2
edited by Admin
on 2025/02/28 12:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,10 +1,8 @@
1 -This document describes settings and states of the BMS Main X device.
1 +Настройка осуществляется с помощью программы ElectricDeviceMonitor версии не ниже 1.17.3 (доступна по [[ссылке>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) по
2 2  
3 -Configuring can be done using the ElectricDeviceMonitor above the 1.17.3 (available by the [[link>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) via
4 -
5 5  * USB;
6 -* CAN bus (Systec, PEAK, Marathon and USB-CAN adapters are supported);
7 -* TCP connection (BMS Wi-Fi or BMS LANmodule must be installed on BMS Main X).
4 +* CAN bus (поддерживаются адаптеры Systec, PEAK, Marathon и USB-CAN);
5 +* TCP connection (для этого должны быть установлены BMS Wi-Fi или BMS LANmodule).
8 8  
9 9  After connecting, the device is identified as a device with a serial interface (COM port) as in the figure below:
10 10