Skip to Content
Last modified by Admin on 2025/03/18 12:50
From version 7.1
edited by Admin
on 2025/02/20 13:13
Change comment: There is no comment for this version
To version 11.1
edited by Admin
on 2025/03/18 12:31
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,22 @@
1 1  (% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 2  = Installation and connection =
3 3  
4 +== Safety rules ==
5 +
6 +To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, **at least one contactor **able to break the load and charge circuits must be connected to the BMS.
7 +
8 +Before use, **configure the system**. Proper operation of the BMS is possible only if it is correctly configured.
9 +
10 +(% class="box warningmessage" %)
11 +(((
12 +The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
13 +)))
14 +
15 +(% class="box errormessage" %)
16 +(((
17 +**The system is not designed to operate with batteries whose total voltage exceeds 1200 V.**
18 +)))
19 +
4 4  == Installation ==
5 5  
6 6  The mounting area of the BMS Main X must be protected from mechanical particles (dust, dirt, large objects) and water.
... ... @@ -20,7 +20,6 @@
20 20  )))|105 × 115 × 15
21 21  |Mounting dimensions (length × width), mm|99 × 109
22 22  |Mounting holes|M3
23 -|Headers X1, X3-X8 type|Molex series Micro-Fit
24 24  
25 25  == Connection ==
26 26