Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 6.4
edited by Admin
on 2025/01/28 16:06
Change comment: There is no comment for this version
To version 6.6
edited by Admin
on 2025/01/28 16:11
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -55,13 +55,12 @@
55 55  The Main contactor algorithm supports the following modes:
56 56  
57 57  * Always on;
58 -* Automatic, when the main contactor closes by the internal charging and discharging algorithms at the same time with Precharging, Charging and Discharging contactors.
58 +* Automatic, when the main contactor closes by the internal charging and discharging algorithms at the same time with Precharging, Charging, Discharging and Charging/Discharging contactors.
59 59  
60 60  In “Always on” mode, the main contactor closes if all the following is true:
61 61  
62 62  * “Charging” contactor is open;
63 63  * “Discharging” contactor is open;
64 -
65 65  * there are no errors.
66 66  
67 67  In “Always on” mode, the main contactor opens if “Charging” and “Discharging” contactors are open and any of the following is true:
... ... @@ -117,7 +117,7 @@
117 117  
118 118  * Precharge current threshold to close the discharging contactor – a current value to ensure that precharge process has finished and it is allowed to close the discharging contactor, A;
119 119  * Check voltages before and after contactors to finish precharging – a flag to check the voltages before and after contactors to ensure that precharge process has finished and it is allowed to close the discharging contactor;
120 -* Minimum voltage difference to finish precharging – a minimum voltage difference before and after contactors to ensure precharge process finished, V.
119 +* Minimum voltage difference before and after contactors to finish precharging – a minimum voltage difference before and after contactors to ensure precharge process finished, V.
121 121  
122 122  === Charge ===
123 123