Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 38.1
edited by Admin
on 2025/03/20 13:03
Change comment: Uploaded new attachment "1742475800208-207.png", version {1}
To version 35.6
edited by Admin
on 2025/03/20 12:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -197,8 +197,7 @@
197 197  * Disconnect modules that are not ready to charge – a flag for disconnecting modules that have the “Ready to charge” signal cleared.
198 198  * Disconnect all modules if one is not ready to charge – a flag for disconnecting all modules if any of the modules have the “Ready to charge” signal cleared;
199 199  * Join modules on the “Charge request” signal – a flag to enable automatic modules joining if “Charge request” signal appears;
200 -* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
201 -* Regulator: Gain – a gain of current regulator;
200 +*
202 202  * Maximum CONTINUOUS charge current limit – a maximum continuous allowed charging current of all battery, A;
203 203  * Maximum charge current limit – a maximum allowed charging current of all battery, A;
204 204  * Errors 1 (2) to disconnect all battery modules – errors that cause all battery modules to be disconnected from the common bus;
... ... @@ -242,7 +242,7 @@
242 242  
243 243  The battery discharge management is configured in the "Control → Discharge" section:
244 244  
245 -[[image:1742473693993-991.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="237" width="600"]]
244 +[[image:1738081173083-894.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="162" width="600"]]
246 246  
247 247  In this section:
248 248  
... ... @@ -261,8 +261,6 @@
261 261  * Disconnect modules that are not ready to discharge – a flag for disconnecting modules that have the “Ready to discharge” signal cleared.
262 262  * Disconnect all modules if one is not ready to discharge – a flag for disconnecting all modules if one of the modules have the “Ready to discharge” signal cleared;
263 263  * Join modules on the “Discharge request” signal – a flag to enable automatic modules joining if “Discharge request” signal appears;
264 -* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
265 -* Regulator: Gain – a gain of current regulator;
266 266  * Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
267 267  * Maximum discharge current limit – a maximum allowed discharging current of all the battery, A;
268 268  * Errors 1 (2) to disconnect all battery modules – errors that cause all battery modules to be disconnected from the common bus;
... ... @@ -311,6 +311,7 @@
311 311  
312 312  The charge/discharge contactor control is configured in the “Control → Charge/Discharge” section:
313 313  
311 +[[image:1739292809635-913.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="238" width="800"]]
314 314  
315 315  In this section:
316 316  
... ... @@ -333,8 +333,6 @@
333 333  * Disconnect modules that are not ready to discharge – a flag for disconnecting modules that have the “Ready to discharge” signal cleared;
334 334  * Join modules on the “Charge request” signal – a flag to enable automatic modules joining if “Charge request” signal appears;
335 335  * Join modules on the “Discharge request” signal – a flag to enable automatic modules joining if “Discharge request” signal appears;
336 -* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
337 -* Regulator: Gain – a gain of current regulator;
338 338  * Maximum CONTINUOUS charge current limit – a maximum allowed continuous charging current of all the battery, A;
339 339  * Maximum charge current limit – a maximum allowed charging current of all the battery, A;
340 340  * Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
1742475784289-921.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -62.8 KB
Content
1742475800208-207.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -73.3 KB
Content