Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 35.8
edited by Admin
on 2025/03/20 12:59
Change comment: There is no comment for this version
To version 37.2
edited by Admin
on 2025/03/20 13:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -197,7 +197,8 @@
197 197  * Disconnect modules that are not ready to charge – a flag for disconnecting modules that have the “Ready to charge” signal cleared.
198 198  * Disconnect all modules if one is not ready to charge – a flag for disconnecting all modules if any of the modules have the “Ready to charge” signal cleared;
199 199  * Join modules on the “Charge request” signal – a flag to enable automatic modules joining if “Charge request” signal appears;
200 -* Regulator
200 +* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
201 +* Regulator: Gain – a gain of current regulator;
201 201  * Maximum CONTINUOUS charge current limit – a maximum continuous allowed charging current of all battery, A;
202 202  * Maximum charge current limit – a maximum allowed charging current of all battery, A;
203 203  * Errors 1 (2) to disconnect all battery modules – errors that cause all battery modules to be disconnected from the common bus;
... ... @@ -241,7 +241,7 @@
241 241  
242 242  The battery discharge management is configured in the "Control → Discharge" section:
243 243  
244 -[[image:1738081173083-894.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="162" width="600"]]
245 +[[image:1742473693993-991.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="237" width="600"]]
245 245  
246 246  In this section:
247 247  
... ... @@ -260,6 +260,8 @@
260 260  * Disconnect modules that are not ready to discharge – a flag for disconnecting modules that have the “Ready to discharge” signal cleared.
261 261  * Disconnect all modules if one is not ready to discharge – a flag for disconnecting all modules if one of the modules have the “Ready to discharge” signal cleared;
262 262  * Join modules on the “Discharge request” signal – a flag to enable automatic modules joining if “Discharge request” signal appears;
264 +* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
265 +* Regulator: Gain – a gain of current regulator;
263 263  * Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
264 264  * Maximum discharge current limit – a maximum allowed discharging current of all the battery, A;
265 265  * Errors 1 (2) to disconnect all battery modules – errors that cause all battery modules to be disconnected from the common bus;
... ... @@ -308,7 +308,6 @@
308 308  
309 309  The charge/discharge contactor control is configured in the “Control → Charge/Discharge” section:
310 310  
311 -[[image:1739292809635-913.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="238" width="800"]]
312 312  
313 313  In this section:
314 314  
... ... @@ -331,6 +331,8 @@
331 331  * Disconnect modules that are not ready to discharge – a flag for disconnecting modules that have the “Ready to discharge” signal cleared;
332 332  * Join modules on the “Charge request” signal – a flag to enable automatic modules joining if “Charge request” signal appears;
333 333  * Join modules on the “Discharge request” signal – a flag to enable automatic modules joining if “Discharge request” signal appears;
336 +* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
337 +* Regulator: Gain – a gain of current regulator;
334 334  * Maximum CONTINUOUS charge current limit – a maximum allowed continuous charging current of all the battery, A;
335 335  * Maximum charge current limit – a maximum allowed charging current of all the battery, A;
336 336  * Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
1742475784289-921.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +62.8 KB
Content