Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 35.5
edited by Admin
on 2025/03/20 12:59
Change comment: There is no comment for this version
To version 38.2
edited by Admin
on 2025/03/20 13:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -197,6 +197,8 @@
197 197  * Disconnect modules that are not ready to charge – a flag for disconnecting modules that have the “Ready to charge” signal cleared.
198 198  * Disconnect all modules if one is not ready to charge – a flag for disconnecting all modules if any of the modules have the “Ready to charge” signal cleared;
199 199  * Join modules on the “Charge request” signal – a flag to enable automatic modules joining if “Charge request” signal appears;
200 +* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
201 +* Regulator: Gain – a gain of current regulator;
200 200  * Maximum CONTINUOUS charge current limit – a maximum continuous allowed charging current of all battery, A;
201 201  * Maximum charge current limit – a maximum allowed charging current of all battery, A;
202 202  * Errors 1 (2) to disconnect all battery modules – errors that cause all battery modules to be disconnected from the common bus;
... ... @@ -240,7 +240,7 @@
240 240  
241 241  The battery discharge management is configured in the "Control → Discharge" section:
242 242  
243 -[[image:1738081173083-894.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="162" width="600"]]
245 +[[image:1742473693993-991.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="237" width="600"]]
244 244  
245 245  In this section:
246 246  
... ... @@ -259,6 +259,8 @@
259 259  * Disconnect modules that are not ready to discharge – a flag for disconnecting modules that have the “Ready to discharge” signal cleared.
260 260  * Disconnect all modules if one is not ready to discharge – a flag for disconnecting all modules if one of the modules have the “Ready to discharge” signal cleared;
261 261  * Join modules on the “Discharge request” signal – a flag to enable automatic modules joining if “Discharge request” signal appears;
264 +* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
265 +* Regulator: Gain – a gain of current regulator;
262 262  * Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
263 263  * Maximum discharge current limit – a maximum allowed discharging current of all the battery, A;
264 264  * Errors 1 (2) to disconnect all battery modules – errors that cause all battery modules to be disconnected from the common bus;
... ... @@ -307,8 +307,9 @@
307 307  
308 308  The charge/discharge contactor control is configured in the “Control → Charge/Discharge” section:
309 309  
310 -[[image:1739292809635-913.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="238" width="800"]]
311 311  
315 +[[image:1742475800208-207.png]]
316 +
312 312  In this section:
313 313  
314 314  * Enable – a flag to enable battery charge/discharge controller;
... ... @@ -330,6 +330,8 @@
330 330  * Disconnect modules that are not ready to discharge – a flag for disconnecting modules that have the “Ready to discharge” signal cleared;
331 331  * Join modules on the “Charge request” signal – a flag to enable automatic modules joining if “Charge request” signal appears;
332 332  * Join modules on the “Discharge request” signal – a flag to enable automatic modules joining if “Discharge request” signal appears;
338 +* Regulator: Keep battery module currents below limits – a flag to enable regulation of module currents to be below module current limit;
339 +* Regulator: Gain – a gain of current regulator;
333 333  * Maximum CONTINUOUS charge current limit – a maximum allowed continuous charging current of all the battery, A;
334 334  * Maximum charge current limit – a maximum allowed charging current of all the battery, A;
335 335  * Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
1742475784289-921.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +62.8 KB
Content
1742475800208-207.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +73.3 KB
Content