Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 28.1
edited by Admin
on 2025/02/19 16:36
Change comment: There is no comment for this version
To version 25.1
edited by Admin
on 2025/02/19 15:01
Change comment: Загрузить новое вложение 1739977307594-438.png

Summary

Details

Page properties
Content
... ... @@ -272,12 +272,6 @@
272 272  * Dependent - Charge/Discharge contactor depends on Charge and Discharge algorithms and their signals and behaves as Charging contactor if "Charging" signal is set, otherwise – as Discharging contactor;
273 273  * Independent - Charge/Discharge contactor is based on its own controller.
274 274  
275 -(% class="box warningmessage" %)
276 -(((
277 -**Warning!**
278 -Charge/Discharge algorithms on BMS Main 3X and on battery modules controllers must **be the same**!
279 -)))
280 -
281 281  The charging/discharging controller supports the following modes:
282 282  
283 283  1. Charging/Discharging is always allowed (Always on) – the device ignores voltage and current unbalance of the battery modules and commands to close the discharging contactors of the battery modules and the main discharging contactor.
... ... @@ -310,9 +310,6 @@
310 310  In this section:
311 311  
312 312  * Enable – a flag to enable battery charge/discharge controller;
313 -* Mode:
314 -** Dependent - Charge/Discharge contactor depends on Charge and Discharge algorithms and their signals;
315 -** Independent - Charge/Discharge contactor is based on its own controller.
316 316  * Algorithm:
317 317  ** Always on – discharging is always allowed;
318 318  ** Balanced – discharging is allowed provided that all battery modules are balanced;