Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 22.2
edited by Admin
on 2025/02/19 14:56
Change comment: There is no comment for this version
To version 20.1
edited by Admin
on 2025/02/19 14:45
Change comment: Uploaded new attachment "1739976358691-364.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -18,15 +18,15 @@
18 18  
19 19  Flags for enabling battery modules are configured in the "Control → Modules → Enable (modules 1 to 8)" and "Control → Modules → Enable (modules 9 to 32)" section:
20 20  
21 +[[image:1734023979582-179.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="165" width="600"]]
21 21  
22 -[[image:1739976358691-364.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="164" width="600"]]
23 23  The network addresses of the battery modules are configured in the "Control → Modules → Node IDs (modules 1 to 8)” and "Control → Modules → Node IDs (modules 9 to 32)”:
24 24  
25 +[[image:1734023979583-589.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="186" width="600"]]
25 25  
26 -[[image:1739976370994-390.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="167" width="600"]]
27 27  Each module in a battery must have a unique address. You can change the address in the battery module settings in the “Connectivity → CAN” section of the BMS Main 3 settings.
28 28  
29 -In corresponding section you can set up minimum number of found modules to finish initialization.
29 +In corresponding section you can set up maximum number of found modules to finish initialization.
30 30  
31 31  === Calculation of battery parameters ===
32 32  
... ... @@ -61,13 +61,13 @@
61 61  
62 62  * “Charging” contactor is open;
63 63  * “Discharging” contactor is open;
64 -* there are no errors from the list of activated in "Errors 1,2..." bitfields.
64 +* there are no errors.
65 65  
66 66  In “Always on” mode, the main contactor opens if “Charging” and “Discharging” contactors are open and any of the following is true:
67 67  
68 68  * “Charging current present” is set;
69 69  * “Discharging current present” is set;
70 -* one or more errors persistfrom the list of activated in "Errors 1,2..." bitfields..
70 +* one or more errors persist.
71 71  
72 72  To change the parameters of the main contactor, select the "Control → Main contactor" section:
73 73  
1739976370994-390.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -34.2 KB
Content