Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 21.1
edited by Admin
on 2025/02/19 14:46
Change comment: Uploaded new attachment "1739976370994-390.png", version {1}
To version 22.2
edited by Admin
on 2025/02/19 14:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -18,15 +18,15 @@
18 18  
19 19  Flags for enabling battery modules are configured in the "Control → Modules → Enable (modules 1 to 8)" and "Control → Modules → Enable (modules 9 to 32)" section:
20 20  
21 -[[image:1734023979582-179.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="165" width="600"]]
22 22  
22 +[[image:1739976358691-364.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="164" width="600"]]
23 23  The network addresses of the battery modules are configured in the "Control → Modules → Node IDs (modules 1 to 8)” and "Control → Modules → Node IDs (modules 9 to 32)”:
24 24  
25 -[[image:1734023979583-589.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="186" width="600"]]
26 26  
26 +[[image:1739976370994-390.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="167" width="600"]]
27 27  Each module in a battery must have a unique address. You can change the address in the battery module settings in the “Connectivity → CAN” section of the BMS Main 3 settings.
28 28  
29 -In corresponding section you can set up maximum number of found modules to finish initialization.
29 +In corresponding section you can set up minimum number of found modules to finish initialization.
30 30  
31 31  === Calculation of battery parameters ===
32 32  
... ... @@ -61,13 +61,13 @@
61 61  
62 62  * “Charging” contactor is open;
63 63  * “Discharging” contactor is open;
64 -* there are no errors.
64 +* there are no errors from the list of activated in "Errors 1,2..." bitfields.
65 65  
66 66  In “Always on” mode, the main contactor opens if “Charging” and “Discharging” contactors are open and any of the following is true:
67 67  
68 68  * “Charging current present” is set;
69 69  * “Discharging current present” is set;
70 -* one or more errors persist.
70 +* one or more errors persistfrom the list of activated in "Errors 1,2..." bitfields..
71 71  
72 72  To change the parameters of the main contactor, select the "Control → Main contactor" section:
73 73