Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 15.2
edited by Admin
on 2025/02/19 13:01
Change comment: There is no comment for this version
To version 22.2
edited by Admin
on 2025/02/19 14:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -18,15 +18,15 @@
18 18  
19 19  Flags for enabling battery modules are configured in the "Control → Modules → Enable (modules 1 to 8)" and "Control → Modules → Enable (modules 9 to 32)" section:
20 20  
21 -[[image:1734023979582-179.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="165" width="600"]]
22 22  
22 +[[image:1739976358691-364.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="164" width="600"]]
23 23  The network addresses of the battery modules are configured in the "Control → Modules → Node IDs (modules 1 to 8)” and "Control → Modules → Node IDs (modules 9 to 32)”:
24 24  
25 -[[image:1734023979583-589.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="186" width="600"]]
26 26  
26 +[[image:1739976370994-390.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="167" width="600"]]
27 27  Each module in a battery must have a unique address. You can change the address in the battery module settings in the “Connectivity → CAN” section of the BMS Main 3 settings.
28 28  
29 -In corresponding section you can set up maximum number of found modules to finish initialization.
29 +In corresponding section you can set up minimum number of found modules to finish initialization.
30 30  
31 31  === Calculation of battery parameters ===
32 32  
... ... @@ -61,13 +61,13 @@
61 61  
62 62  * “Charging” contactor is open;
63 63  * “Discharging” contactor is open;
64 -* there are no errors.
64 +* there are no errors from the list of activated in "Errors 1,2..." bitfields.
65 65  
66 66  In “Always on” mode, the main contactor opens if “Charging” and “Discharging” contactors are open and any of the following is true:
67 67  
68 68  * “Charging current present” is set;
69 69  * “Discharging current present” is set;
70 -* one or more errors persist.
70 +* one or more errors persistfrom the list of activated in "Errors 1,2..." bitfields..
71 71  
72 72  To change the parameters of the main contactor, select the "Control → Main contactor" section:
73 73  
... ... @@ -118,7 +118,7 @@
118 118  * Check voltages before and after contactors to finish precharging – a flag to check the voltages before and after contactors to ensure that precharge process has finished and it is allowed to close the discharging contactor;
119 119  * Minimum voltage difference before and after contactors to finish precharging – a minimum voltage difference before and after contactors to ensure precharge process finished, V;
120 120  * Number of precharging attempts – maximum number of precharging attempts before setting the "Precharge error";
121 -* Delay before current measurement – a delay before first current measurement
121 +* Delay before current measurement – a delay before first current measurement after closing precharge, millisecond;
122 122  * Precharge time – a duration of closing the precharge contactor before closing the discharging contactor, millisecond;
123 123  * Relaxation between attempts – a duration between precharge attempts, millisecond;
124 124  * Check the power dissipated in the preacharge resistor - a flag to enable the calculation of power dissipated in precharge resistor;
1739976172181-924.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +29.0 KB
Content
1739976193603-451.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
1739976228035-922.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content
1739976358691-364.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +33.8 KB
Content
1739976370994-390.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +34.2 KB
Content