Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 12.31
edited by Admin
on 2025/02/11 16:50
Change comment: There is no comment for this version
To version 12.32
edited by Admin
on 2025/02/11 16:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -319,10 +319,10 @@
319 319  * Disconnect modules that are not ready to discharge – a flag for disconnecting modules that have the “Ready to discharge” signal cleared;
320 320  * Join modules on the “Charge request” signal – a flag to enable automatic modules joining if “Charge request” signal appears;
321 321  * Join modules on the “Discharge request” signal – a flag to enable automatic modules joining if “Discharge request” signal appears;
322 +* Maximum CONTINUOUS charge current limit – a maximum allowed continuous charging current of all the battery, A;
323 +* Maximum charge current limit – a maximum allowed charging current of all the battery, A;
322 322  * Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
323 323  * Maximum discharge current limit – a maximum allowed discharging current of all the battery, A;
324 -* Maximum CONTINUOUS discharge current limit – a maximum allowed continuous discharging current of all the battery, A;
325 -* Maximum discharge current limit – a maximum allowed discharging current of all the battery, A;
326 326  * Errors 1 (2) to disconnect all battery modules – errors that cause all battery modules to be disconnected from the common bus;
327 327  * Errors 1 (2) to open the discharging contactor – errors that cause the main discharging contactor "Discharging" to open,
328 328  * Switch of the discharging contactor on errors without a delay – a flag that allows the main discharging contactor “Discharging” to be opened without delay if errors are detected.