Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/05/30 16:50
From version 12.10
edited by Admin
on 2025/02/11 16:24
Change comment: There is no comment for this version
To version 12.11
edited by Admin
on 2025/02/11 16:26
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -266,6 +266,11 @@
266 266  
267 267  The BMS Main 3X can control the charging/discharging contactor that is used to both charge and discharge the battery.
268 268  
269 +Charge/Discharge contactor has two algorithms of operation:
270 +
271 +* Dependent - Charge/Discharge contactor depends on Charge and Discharge algorithms and their signals and behaves as Charging contactor if Charging signal is set, otherwise – as Discharging contactor;
272 +* Independent - Charge/Discharge contactor is based on its own controller.
273 +
269 269  The charge/discharge contactor (“Charging/Discharging” signal) receives a “Charging” signal (generated by the charge controller) if a “Charge request” signal is received from the upper-level system. In all other cases, the "Discharging" signal is output to the contactor (generated by the discharge controller).
270 270  
271 271  The charge/discharge contactor control is configured in the “Control → Charge/Discharge” section: