Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/17 15:00
From version 8.1
edited by Admin
on 2024/12/26 17:23
Change comment: There is no comment for this version
To version 9.2
edited by Admin
on 2024/12/26 17:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,7 +7,7 @@
7 7  
8 8  Updating the BMS Main 3 / BMS Main 3X firmware can be done in the following ways:
9 9  
10 -* via bootloader (available via USB only)
10 +* via bootloader (available via USB only);
11 11  * via device configuration interface (available via USB, CAN and TCP).
12 12  
13 13  The following hardware and software are required:
... ... @@ -14,7 +14,7 @@
14 14  
15 15  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X;
16 16  * USB/CAN adapter for updating via CAN bus;
17 -* USB cable for updating via Serial port;
17 +* USB-mini cable for updating via USB;
18 18  * BMS Wi-Fi or BMS LANmodule installed on BMS Main 3 if updating via TCP;
19 19  * Firmware file (must be in .bin format).
20 20