Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/17 15:00
From version 5.1
edited by Admin
on 2024/12/26 17:09
Change comment: Uploaded new attachment "1735232992154-566.png", version {1}
To version 4.1
edited by Admin
on 2024/12/13 12:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,17 +7,23 @@
7 7  
8 8  Updating the BMS Main 3 / BMS Main 3X firmware can be done in the following ways:
9 9  
10 -* via unified bootloader (available via USB only)
11 -* via device configuration interface (available via USB, CAN and TCP).
10 +* via USB;
11 +* via CAN bus;
12 +* via RS-485 bus;
13 +* using the device configuration interface (available via USB, CAN, and Wi-Fi).
12 12  
13 13  The following hardware and software are required:
14 14  
15 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X;
16 -* USB/CAN adapter for updating via CAN bus;
17 -* USB cable for updating via COM port;
18 -* BMS Wi-Fi or BMS LANmodule installed if updating via TCP;
19 -* Firmware file (must be in .bin format).
17 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X.
18 +* USB/CAN adapter for updating via CAN bus.
19 +* USB/RS-485 adapter for updating via RS-485 bus.
20 +* Firmware file (must be in Motorola S-record format).
20 20  
22 +Firmware updating includes two steps:
23 +
24 +* starting the bootloader;
25 +* uploading the firmware file to the BMS Main flash memory.
26 +
21 21  == Updating via USB, CAN, RS-485 ==
22 22  
23 23  **~1. Start the device bootloader.**
1735232992154-566.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -32.1 KB
Content