Changes for page 5. Firmware update

Last modified by Admin on 2025/02/17 15:00

From version 4.3
edited by Admin
on 2024/12/26 17:08
Change comment: There is no comment for this version
To version 4.2
edited by Admin
on 2024/12/26 17:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -12,12 +12,16 @@
12 12  
13 13  The following hardware and software are required:
14 14  
15 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X;
16 -* USB/CAN adapter for updating via CAN bus;
17 -* USB cable for updating via COM port;
18 -* BMS Wi-Fi or BMS LANmodule installed if updating via TCP;
19 -* Firmware file (must be in .bin format).
15 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X.
16 +* USB/CAN adapter for updating via CAN bus.
17 +* USB  for updating via RS-485 bus.
18 +* Firmware file (must be in Motorola S-record format).
20 20  
20 +Firmware updating includes two steps:
21 +
22 +* starting the bootloader;
23 +* uploading the firmware file to the BMS Main flash memory.
24 +
21 21  == Updating via USB, CAN, RS-485 ==
22 22  
23 23  **~1. Start the device bootloader.**