Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/17 15:00
From version 4.2
edited by Admin
on 2024/12/26 17:07
Change comment: There is no comment for this version
To version 4.1
edited by Admin
on 2024/12/13 12:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,14 +7,16 @@
7 7  
8 8  Updating the BMS Main 3 / BMS Main 3X firmware can be done in the following ways:
9 9  
10 -* via unified bootloader (available via USB only)
11 -* via device configuration interface (available via USB, CAN and TCP).
10 +* via USB;
11 +* via CAN bus;
12 +* via RS-485 bus;
13 +* using the device configuration interface (available via USB, CAN, and Wi-Fi).
12 12  
13 13  The following hardware and software are required:
14 14  
15 15  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X.
16 16  * USB/CAN adapter for updating via CAN bus.
17 -* USB  for updating via RS-485 bus.
19 +* USB/RS-485 adapter for updating via RS-485 bus.
18 18  * Firmware file (must be in Motorola S-record format).
19 19  
20 20  Firmware updating includes two steps: