Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/17 15:00
From version 4.1
edited by Admin
on 2024/12/13 12:24
Change comment: There is no comment for this version
To version 6.1
edited by Admin
on 2024/12/26 17:10
Change comment: Uploaded new attachment "1735233018575-198.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -7,28 +7,27 @@
7 7  
8 8  Updating the BMS Main 3 / BMS Main 3X firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via RS-485 bus;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via unified bootloader (available via USB only)
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X.
18 -* USB/CAN adapter for updating via CAN bus.
19 -* USB/RS-485 adapter for updating via RS-485 bus.
20 -* Firmware file (must be in Motorola S-record format).
15 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X;
16 +* USB/CAN adapter for updating via CAN bus;
17 +* USB cable for updating via COM port;
18 +* BMS Wi-Fi or BMS LANmodule installed if updating via TCP;
19 +* Firmware file (must be in .bin format).
21 21  
21 +== Updating via bootloader ==
22 +
22 22  Firmware updating includes two steps:
23 23  
24 24  * starting the bootloader;
25 25  * uploading the firmware file to the BMS Main flash memory.
26 26  
27 -== Updating via USB, CAN, RS-485 ==
28 -
29 29  **~1. Start the device bootloader.**
30 30  
31 -* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Main 3 / BMS Main 3X device via the USB or CAN connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
30 +* **Method 1**: using the Unified monitor of the ElectricDeviceMonitor program, connect to the BMS Main 3 / BMS Main 3X device via the USB, CAN or TCP connection. Next, in the monitor program, click the "Device → Go to bootloader" menu item:
32 32  
33 33  [[image:1733921869101-125.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
34 34  
... ... @@ -45,10 +45,9 @@
45 45  
46 46  2.1 Launch the ElectricDeviceMonitor’s Updater module:
47 47  
48 -[[image:1733406691402-715.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="315" width="417"]]
47 +[[image:1735232992154-566.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="340" width="450"]]
49 49  
50 50  
51 -[[image:1733406142375-809.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="333" width="312"]]
52 52  
53 53  2.2 From the drop-down menu of the Updater window, select the method of connecting to the BMS Main 3 / BMS Main 3X and configure the connection parameters (the "Settings..." button).
54 54  
1735232992154-566.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +32.1 KB
Content
1735233018575-198.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content