Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/17 15:00
From version 4.1
edited by Admin
on 2024/12/13 12:24
Change comment: There is no comment for this version
To version 4.3
edited by Admin
on 2024/12/26 17:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,23 +7,17 @@
7 7  
8 8  Updating the BMS Main 3 / BMS Main 3X firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via RS-485 bus;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via unified bootloader (available via USB only)
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 -* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X.
18 -* USB/CAN adapter for updating via CAN bus.
19 -* USB/RS-485 adapter for updating via RS-485 bus.
20 -* Firmware file (must be in Motorola S-record format).
15 +* ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X;
16 +* USB/CAN adapter for updating via CAN bus;
17 +* USB cable for updating via COM port;
18 +* BMS Wi-Fi or BMS LANmodule installed if updating via TCP;
19 +* Firmware file (must be in .bin format).
21 21  
22 -Firmware updating includes two steps:
23 -
24 -* starting the bootloader;
25 -* uploading the firmware file to the BMS Main flash memory.
26 -
27 27  == Updating via USB, CAN, RS-485 ==
28 28  
29 29  **~1. Start the device bootloader.**