Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/17 15:00
From version 4.1
edited by Admin
on 2024/12/13 12:24
Change comment: There is no comment for this version
To version 4.2
edited by Admin
on 2024/12/26 17:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,16 +7,14 @@
7 7  
8 8  Updating the BMS Main 3 / BMS Main 3X firmware can be done in the following ways:
9 9  
10 -* via USB;
11 -* via CAN bus;
12 -* via RS-485 bus;
13 -* using the device configuration interface (available via USB, CAN, and Wi-Fi).
10 +* via unified bootloader (available via USB only)
11 +* via device configuration interface (available via USB, CAN and TCP).
14 14  
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 3 / BMS Main 3X.
18 18  * USB/CAN adapter for updating via CAN bus.
19 -* USB/RS-485 adapter for updating via RS-485 bus.
17 +* USB  for updating via RS-485 bus.
20 20  * Firmware file (must be in Motorola S-record format).
21 21  
22 22  Firmware updating includes two steps: