Changes for page 4.1 Signals

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Parent

...	...	@@ -1,1 +1,1 @@
1		-Battery management systems.BMS Main 3.4\. Monitoring.WebHome
	1	+drafts.bms-main-3.4\. Monitoring.WebHome

Content

...	...	@@ -10,7 +10,25 @@
10	10
11	11	In this section:
12	12
13		-* Input #1 - Input #8 – states of the inputs1-4 respectively.
	13	+* Battery cover – a signal from the battery cover;
	14	+* Charger connected – a signal indicating that charger is connected;
	15	+* Power up/down request – a request to power down the device;
	16	+* Inhibit charging – a command to open the charging contactor;
	17	+* Inhibit discharging – a command to open the discharging contactor;
	18	+* CH contactor feedback – a signal from charging contactor feedback loop;
	19	+* DCH contactor feedback – a signal from discharging contactor feedback loop;
	20	+* Insulation status – a signal from an insulation monitoring device;
	21	+* Charge request – a request to close the charging contactor;
	22	+* Precharge request – a request to close the precharging contactor;
	23	+* Discharge request – a request to close the discharging contactor;
	24	+* PCH contactor feedback – a signal from precharging contactor feedback loop;
	25	+* CH/DCH contactor feedback – a signal from charging/discharging contactor feedback loop;
	26	+* Main contactor feedback – a signal from main contactor feedback loop;
	27	+* Interlock – a signal from interlock loop;
	28	+* Fuse 1, Fuse 2, Fuse 3 – signals from fuses;
	29	+* Circuit breaker status – status of protection disconnector;
	30	+* Balancing request – a request to balance the cells;
	31	+* Close Main contactor – a request to close the main contactor.
14	14
15	15	The states of the discrete output signals are available in the "Signals → Output discrete signals" section:
16	16