Changes for page 4.1 Signals

Last modified by Admin on 2025/02/11 17:36

From version 2.2
edited by Admin
on 2024/12/09 17:26
Change comment: Update document after refactoring.
To version 2.4
edited by Admin
on 2024/12/26 15:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Main 3.4\. Monitoring.WebHome
1 +Battery management systems.BMS Main 3.4\. Monitoring.WebHome
Content
... ... @@ -10,25 +10,7 @@
10 10  
11 11  In this section:
12 12  
13 -* Battery cover – a signal from the battery cover;
14 -* Charger connected – a signal indicating that charger is connected;
15 -* Power up/down request – a request to power down the device;
16 -* Inhibit charging – a command to open the charging contactor;
17 -* Inhibit discharging – a command to open the discharging contactor;
18 -* CH contactor feedback – a signal from charging contactor feedback loop;
19 -* DCH contactor feedback – a signal from discharging contactor feedback loop;
20 -* Insulation status – a signal from an insulation monitoring device;
21 -* Charge request – a request to close the charging contactor;
22 -* Precharge request – a request to close the precharging contactor;
23 -* Discharge request – a request to close the discharging contactor;
24 -* PCH contactor feedback – a signal from precharging contactor feedback loop;
25 -* CH/DCH contactor feedback – a signal from charging/discharging contactor feedback loop;
26 -* Main contactor feedback – a signal from main contactor feedback loop;
27 -* Interlock – a signal from interlock loop;
28 -* Fuse 1, Fuse 2, Fuse 3 – signals from fuses;
29 -* Circuit breaker status – status of protection disconnector;
30 -* Balancing request – a request to balance the cells;
31 -* Close Main contactor – a request to close the main contactor.
13 +* Input #1 - Input #8 – states of the inputs1-4 respectively.
32 32  
33 33  The states of the discrete output signals are available in the "Signals → Output discrete signals" section:
34 34