Changes for page 3.3 Control

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -71,7 +71,7 @@
71	71	* Minimal SOC – the battery SOC is assumed to be the minimum SOC among the cells;
72	72	* Average SOC – the battery SOC is taken equal to the arithmetic average of the cell SOC;
73	73	* Min-Max SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if any cell have 100% SOC, b) 0% if any cell have 0% SOC;
74		-* Max-Min SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be assumed to be a) 100% if all cells have 100% SOC, b) 0% if all cells have 0% SOC;
	74	+* Max-Min SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if all cells have 100% SOC, b) 0% if all cells have 0% SOC;
75	75
76	76	Other parameters:
77	77
...	...	@@ -108,6 +108,7 @@
108	108
109	109	R = (U-U,,ocv,,) / I,,stable,,,
110	110
	111	+
111	111	where U is the cell voltage measured in the charge or discharge state, V; U,,ocv,, is the cell voltage measured in the state of relaxation (before switching to the state of charge or discharge); I,,stable,, – stabilized current through the cell in the state of charge or discharge.
112	112
113	113	The second method is used for a stepwise change in the current through the cell, while the value of the cell resistance: